Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Web Growth

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Web Growth

    Hi all,
    Does anyone use web growth. We have prinergy evo and preps and are using the web growth program for better registration for the press.( no bussel wheels.) I can do the math no problem and get it to register nicely, but the settings seem to change with the weather. we use different settings for paper types and sizes. the settings go up and down from week to week. has anyone used this program, anyone have any advice?
    other than get bussel wheels.

  • #2
    Re: Web Growth

    Ryan:

    Perhaps not the answer you want, but several
    large web shops with your pre-press configuration also use Agfa's Web Growth compensation option/feature of Apogee PrintDrive, taking the alien ripped/screened 1-bit-TIFF data intended to go to plate, and then
    applies compensation prior to output.

    Agfa's solution can adjust a variety of anamorphic distortions - +/- up and down, and side to side, in increments you measure for
    different paper/press and humidity situations.

    This is applied differently on each separation,
    occurs on the fly, and does not alter the stored 1-bit-TFF data. These templates can be stored via hot folders, and fine-tuned over time.

    Or, you can play around with bussel wheels.

    Regards,
    Steve Musselman, Agfa Graphics - USA,
    Senior Corporate Account Executive

    Comment


    • #3
      Re: Web Growth

      Thank You

      Comment


      • #4
        Re: Web Growth

        > {quote:title=rbarsanti wrote:}{quote}
        > I can do the math no problem and get it to register nicely, but the settings seem to change with the weather.

        This might have been intended as a "toss-off" statement, but I think there's A LOT of truth in it.

        rich

        Comment

        4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
        Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

        What's Going On

        Collapse

        There are currently 3047 users online. 47 members and 3000 guests.

        Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

        Working...
        X