Xante Platemaker 4 issues

office-offset

New member
Hello
We have some trouble with our Xante Platemaker 4.
The following issue appears:

Our PDF/image size is exactly from crop-mark to crop-mark 300 mm x 220 mm
When we print on a Polyester-Plate the image is slightly larger 302mm x 221 mm

We checked our pdf it is fine. As well we printed the image on a OKI Laserprinter and it is the correct size

What could be the problem? any suggestions?
 
So not to be a nit picker but you are worried about a .6% difference on a plastic plate . . . . if there is an issue with that tolerance you should move to metal plates . . . or you could print it at, say .993377 and that would compensate for it pretty closely . . .
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top