Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Service manual to presstek dimension 400

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Service manual to presstek dimension 400

    Hi everybody. Someone has the service manual for a Presstek CTP Dimension 400? In a specific way this CTP is not working, so I need to evaluate the the problem and to be possible fix it. I appreciate your help and the cost of this manual, and of course parts. Attached you will see the error, and ID of the CTP. Many thanks.
    ERROR ID PRESSTEK CTP DIMENSION 400 ERROR

  • #2
    A counter gets reset when techs change something, i.e. the filter. Have you ever replaced the filter? Has service done this? Been close to 2 years since we had our Dimension, but there was someplace in the software where you could reset the counter for the filter. This would get rid of that error, though if you need to replace the filter resetting this obviously does not help. I will hunt through my files and see if I still have a PDF of the manual.

    this is a link to the maintenance guide, should have it covered in there for the filters
    https://www.dropbox.com/s/77afnwublv...991_C.pdf?dl=0

    Filters are bloody expensive, we took to ripping ours apart, cleaning it ourselves and taping it all back together. I would say we maybe double or tripled the life doing it this way. I cannot remember the price but I think they wanted $900 CDN for the big box filter it had on in the vacuum.
    Last edited by wonderings; 12-05-2017, 11:02 AM.

    Comment


    • #3
      Dear wondering, I appreciate your response, I will link to see the maintenance guide. Good day, for I hope you can find the other manual. Thanks.

      Comment


      • #4
        Attached is a link to the operators manual. I do not have anything more, never needed anything more.

        Good luck!

        https://www.dropbox.com/s/u4ipa0l4lj...951_F.pdf?dl=0

        Comment


        • #5
          Again, thanks wandering, I appreciate your help. I am to serve you. Bye

          Comment


          • #6
            Hi hope you are well
            try to reach me, maybe i can have the service m for presstek ctp400
            Let me know
            Blessing.
            superchock@yandex.com
            cell+whatsApp:+50588611441

            nota: puede escribirme en espanol si desea.

            Comment

            UltimateDuploSmartsoft (Presswise)4OverStandard FinishingKBA
            UltimateDuplo4OverStandard FinishingKBAKBA 4Over

            What's Going On

            Collapse

            There are currently 4867 users online. 113 members and 4754 guests.

            Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

            Working...
            X