rip error

Gills

New member
Hello print planet,

I have a PlateRite 8600 and using EagleRip 4.5 on a PC that came with the CTP.

I would like to change the PC because its kind of old and over the years has become extremely slow.

I was able to extract the Interface card (25pin) from the old PC and inserted it in my new modern PC. However after installing EagleRip 4.5 on the new PC, the CTP doesnt seem to pick the interpreted pages.

The Error I am getting is in the PHOTO I have attached. kindly advise on where I am getting it wrong.

Your help will be highly appreciated.
 

Attachments

  • photo8504.png
    photo8504.png
    68.2 KB · Views: 364
Last edited:
Hello,

if the PCI slots are the same one, normally should be work. however, if we accept that the card has been installed correctly, only the driver of the card needs to be install. Geneally, we usually get encounter this problem after PC replacement, the driver is not to installed correctly.
 
Hello print planet,

I have a PlateRite 8600 and using EagleRip 4.5 on a PC that came with the CTP.

I would like to change the PC because its kind of old and over the years has become extremely slow.

I was able to extract the Interface card (25pin) from the old PC and inserted it in my new modern PC. However after installing EagleRip 4.5 on the new PC, the CTP doesnt seem to pick the interpreted pages.

The Error I am getting is in the PHOTO I have attached. kindly advise on where I am getting it wrong.

Your help will be highly appreciated.

Hi Gills,

Just a question, have you started first the PlateRite and then the .Rip-System?
 
I did actually.. But when I scrutinized the interface card it has the company name labled called 'Founder Electronics' who happen to be the manufacturers of EagleRip. Could it be that the 62 pin interface card is hardware bound (proprietary bloacked such that it is restricted to work with other computers?
 
Hello Gills,

This is system requirements for the Founder IF board.

CPU : Intel (R) i7
Memory : 4G or above
Hard Disk : 200G free space
Display : 1024 x 768 Color
Network : 100MB Ethernet
OS : Windows 7/8/10/Windows 2012

I attached some pictures to install device manager. I hope useful for you.d some pictures to install device drive
Screen Shot 2019-04-07 at 09.20.38.png
 

Attachments

  • Screen Shot 2019-04-07 at 09.20.38.png
    Screen Shot 2019-04-07 at 09.20.38.png
    57.3 KB · Views: 319
  • Screen Shot 2019-04-07 at 09.21.16.png
    Screen Shot 2019-04-07 at 09.21.16.png
    245.8 KB · Views: 309
  • Screen Shot 2019-04-07 at 09.21.36.png
    Screen Shot 2019-04-07 at 09.21.36.png
    101.6 KB · Views: 310
  • Screen Shot 2019-04-07 at 09.21.48.png
    Screen Shot 2019-04-07 at 09.21.48.png
    65.6 KB · Views: 301

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top