Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

RipMate v 5.1 on Harlequin Rip, issues with inconsistant trapping

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RipMate v 5.1 on Harlequin Rip, issues with inconsistant trapping

    http://www.layersmagazine.com/forum/...ghlight=triple

    the above is a link to my question as i originally posted it on the forums a Layers Magazine. At that time, I believed it to be an artwork/indesign problem, but now, after a ton of troubleshooting and testing, I think it might be a RIP issue.
    We are using RipMate v. 5.1.

    I cant find a manual for this anywhere on the net, maybe I havent looked hard enough.
    But if anyone has any ideas on how to fix this problem, I would be most grateful as it seems to be happening more frequently, and we are spending too much time resending plates until we find a temporary fix, such as separations with no trap!
4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

What's Going On

Collapse

There are currently 2753 users online. 45 members and 2708 guests.

Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

Working...
X