Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Help on HarleQuin RIP

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help on HarleQuin RIP

    Good evening. I have a problem with my HighWater Designs Torrent RIP v8.0 HarleQuin RIP. When I run it on the desktop of my rip (computer a mac G4) it launches but displays the following message:
    HWPLUGIN.c
    error loading personality
    error: failed to get information
    system error: 102
    check file locations, driver and card.
    It is impossible for me to install the agfa avantra 25 flaker on my file processing computer. I do not find it when I'm doing printer search.
    thank you in advance

  • #2
    Most probable cause is the PCI board not inserted properly in slot or defective. Check cable going into avantra, connectors at both ends well seated. Make sure the MacOS X is the correct version and was not reinstalled or upgraded. If still no result reinstall the Harlequin software. Keep old SW folder on a different harddisk or partition as a backup.

    Comment

    4OverDuploCanonKBATharsternAvantiXeroxSmartsoft (Presswise)

    Presswise Article

    Collapse

    Automated Order Status Tracking
    In PressWise Workflow Solution


    Presswise order status
    Quick overview of the order status tracking feature on PressWise’s automated workflow solution

    Link to Video

    4OverDuploCanonKBAAvantiXeroxTharsternSmartsoft (Presswise)

    What's Going On

    Collapse

    There are currently 3808 users online. 71 members and 3737 guests.

    Most users ever online was 6,611 at 11:23 AM on 02-27-2019.

    Working...
    X