Standard Finishing
Xerox

Announcement

Collapse
No announcement yet.

Main Motor Not working

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Main Motor Not working

    I have Heidelberg speedmaster sm 102 i have this in Cptronic
    Init...-test
    s-slt con 7EFF
    s-ssk 1m 1 FFFC
    s-ssk 1 m 5 FFFD

    IN DYN.. - TEST

    --
    NOTHING

    WHEN I TRY TO RUN MACHINE on inch ITS BUZER BUT NOT RUNING AND I HAVE sound brake its opened but the main Motor not Run
    I TEST MOTOR ITS OK , THE BRAKE IT OPEND AND ITS HAVE VOLTAGE AT FIELD BUT NO VOLT AT ARM

    any who can help

  • #2
    S-SLT CON : Check the converter power part module, connections/voltages or something wrong with armature circuit. The other faults are of small servo motors.
    Asif Qazi
    www.facebook.com/printindustry

    Comment


    • #3
      Hi sir Good day
      Please do the next test in his machine:
      1) Ground fault circuit frame . main Engine
      2)*Check: D / A converter test .
      3E voltage rating of implausible potentiometer ( < 50mV DC , > 9.95V DC ) .

      Finally look for the Schematic Diagram: depend what country you are maybe the Input voltages to his machine can be 380Vca or 220vca.
      in ANY case you must Test with a Well Known DMM like FLUKE : Terminal R-S-T-N-Ground. R vs S =380 or 220 S vs T 380 or 220Vc R vs T the same.
      If the Voltage are NOT there check the FUSES, or C. BREAKER for the main circuit of Motor.
      If there are Voltages at the terminal of Motor, and NOT running, see if the Brake(coil or solenoid) has voltage and Release the same. otherwise looki for the voltage of Brake( look for the schematic d)
      Let me know
      Blessing
      superchock@yandex.com
      Cell+WhatsApp:+50588611441

      Comment

      CanonKBAAvantiSmartsoft (Presswise)DuploEnfocusXerox

      Free Download

      Collapse

      Trade Show Survey=
      Instant October Trade Show Survey
      Come On! Only 5 Questions

      PRINT 19 and PRINTING United are squaring off in October.
      Will you be at one of them?
      Both? Neither?
      Please take our 1-Minute survey to tell us about your plans for the two big fall shows!

      Take The Survey.

      CanonSmartsoft (Presswise)AvantiGraph ExpoKBAAvantiEnfocusGraph ExpoDuploXerox

      What's Going On

      Collapse

      There are currently 3342 users online. 49 members and 3293 guests.

      Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

      Working...
      X