Diagonal registers icons desapeared !!!!!!

medjber

New member
Hi,
on my cpc 1 i have lost command icones for the diagonal registers on two groups,
how can i get them back??
 

Attachments

  • IMG_2018-04-25_17-55-16.95.jpeg
    IMG_2018-04-25_17-55-16.95.jpeg
    261.3 KB · Views: 226
  • IMG_2018-04-19_17-14-11.08.jpeg
    IMG_2018-04-19_17-14-11.08.jpeg
    458.9 KB · Views: 214
My guess... when you powered up, those 2 cocking motors failed the init test, so CPC will not recognize they exist when it loads. When CPC started up, what screen did it display? Did it say SSK at the top and have a number blinking below?
 
Hi,
The CPC boot normaly without any blinking number.
When i exchange motors connectors inside the cpc and switch it up, nothing happend except that i can control the exchanged motor from the other group.
 
Dear Sir:
I saw you have a lot of trouble, but relax.
1) Please try to replace 3 digit display board, the 7 segment display can be defective.
1a) Try to test the voltage a lamp, a replace lamp or button,make continuity test with a DMM.
2) check the connecting cables againts the interconnection cables.
3)replace the P.C.B or control board too.
Let me know.
Blessing.
[email protected]
cell+whatsApp: 505 88611441​
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top