Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

how to implement JDF?

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to implement JDF?

    hello,
    i want to implement JDF.
    someone can tell me how?
    i have graphisoft and signa station and metadimension.

    Edited by: yaiche on Dec 7, 2007 7:08 AM

    how to connect graphisoft and prinect (wich modul)?

    Edited by: yaiche on Dec 7, 2007 7:10 AM

  • #2
    Re: how to implement JDF?

    I am sorry but I am not familiar with Graphisoft. Your best bet is to contact Heidelberg locally and discuss what you want to do with JDF. Both MetaDimension 6.5 and Signa Station 3.0 are JDF certified. I do not know if Graphisoft is JDF but they should be able to tell you and if so, work with Heidelberg to help you integrate. Good luck.

    Regards,

    Mark Tonkovich
    Heidelberg USA
    Product Manager, CtP & Proofing
    Mark Tonkovich
    Heidelberg USA

    Comment


    • #3
      Re: how to implement JDF?

      thank you for your replay.
      graphisoft is JDF too.
      i'm asking for the technical way to implemant it.

      Comment


      • #4
        Re: how to implement JDF?

        yaiche,

        You will need to have your local Heidelberg rep and Graphisoft discuss the integration and implementation. Testing may be needed or they may have already have experience in implementing the connectivity. Both may need to be at your shop to implement the integration. You can test the JDF at Cip4.org

        Regards,

        Mark Tonkovich
        Heidelberg USA
        Product Manager, CtP & Proofing
        Mark Tonkovich
        Heidelberg USA

        Comment

        4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
        Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

        What's Going On

        Collapse

        There are currently 5434 users online. 115 members and 5319 guests.

        Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

        Working...
        X