Dolev 800V+ STROBE 7 ERROR

oldholborn

New member
Hello,

I am using Dolev 800V+. When I try to expose a job I only get the message "stb general error".

The things I have tried so far is to change the strobe7 card, the shutter, the dynamic cable and I have cleaned the spinner.

The errror message still exists.

Does anyone have a clue on this?

Thank you in advance
 
Hello,

I am using Dolev 800V+. When I try to expose a job I only get the message "stb general error".

The things I have tried so far is to change the strobe7 card, the shutter, the dynamic cable and I have cleaned the spinner.

The errror message still exists.

Does anyone have a clue on this?

Thank you in advance

Oldholborn,

Do you get any other Error Message beside what you said.?
 
Hi all,

I am experiencing the same "STB General Error" on my Dolev 800V2.
Replacing the Strobe7 board with another one, known to be good (from our Lotem 800V) did not help.
Oldholborn - did your problem get solved?
Any suggestions will be appreciated.
 
Problem solved!
This was caused by one specific file and was solved after we fixed that file.
The error disappeared afterwards.
Weird - it ripped ok.
That reality...
Cheers.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top