Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

EVO: making one separation wrong-reading?

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • EVO: making one separation wrong-reading?

    Hey, everyone.

    We're in the process of switching from Apogee to Evo and I'm running into a bit of a problem. We run an S-Wrap on our Goss press fairly often and need to print one color directly. Not sure if there's an easy way to do this, but I'm trying to get only one separation (cyan, in this case) to plate wrong-reading while the others continue out right-reading. Any help would be greatly appreciated.

    Cheers,
    Mike

  • #2
    Re: EVO: making one separation wrong-reading?

    Yes this is possible first u make a pjtf PDF thru preps not ps than u make new template output from imposition/output from pdf u use device option u change the mirror option & u save this template when expose the job choose this template than appear the setting option u choose which color u want expose than option is appear do not output choose and expose.

    Comment


    • #3
      Re: EVO: making one separation wrong-reading?

      Hi,,,,,if you are usig a Magnus or Lotem CTP ( I do not know how is with another CTP) .......you need to erase the actual template and create a new template

      Cheers.

      YR

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
      Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4Over

      What's Going On

      Collapse

      There are currently 4601 users online. 91 members and 4510 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X