Standard Finishing
4OverXerox

Announcement

Collapse
No announcement yet.

Kodak Somora plate scratches

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kodak Somora plate scratches

    I understand that these plates are more sensitive to handling scratches than most processed plates but..........

    We are finding various size Plate material shavings being left behind in loading Magnus plate draws when we go to reload.

    Some of these end up embedded on exit rollers and appear to be causing issues.

    Seems to be a Kodak plate cutting problem.

    Anyone else seeing this?

    Whining pressman also say that fountain solution is polluted and changing color. They are using a Prisco brand, not Kodak formulation.

    Plates preform well other than these side effects

  • #2
    Have you got the new bar flag on the Magnus, this is required for Sonora plates as the old style scratched the back of the plates causing an issue similar to what you describe.

    Comment


    • #3
      I will ask the question! It is less than 6 months old and installed for sonora's. But I've seen worse screw ups

      Comment


      • #4
        Hello sveibi,


        I suggest you take "Responablilty" and clean the plate transportation mechanics, with any metal being CUT - there will be the occasional "Metal Swarf " left behind.


        Regards, Alois

        Comment


        • #5
          sveibl,

          I have some sites running Sonora in the thousands per month (mix of Magnus and Trendsetter machines, auto-loading and manual) with no metal shavings being reported or causing issues. Not to dismiss your experience, I just mean to say that it can and does work. Maybe check into the solution offered by Magnus59, even though I've never heard of that (I certainly don't know all things!).

          As for the fountain solution changing colour... that should definitely not be the case. Are they following the correct startup procedure on the press? I know there is some order to operations required where the dampers are on for a certain number of revolutions before the ink (and similar for stops to ensure trouble-free restarts). Following the correct procedure as prescribed by Kodak should yield good results regardless of the brand of fountain solution used.

          Comment


          • #6
            Originally posted by Dewald View Post
            sveibl,

            Maybe check into the solution offered by Magnus59, even though I've never heard of that (I certainly don't know all things!).
            This is the FCO for the bar flag on the Magnus 400. The original had the metal tip.20190702_124731.jpg

            Comment

            4OverCanonKBAAvantiXeroxSmartsoft (Presswise)DuploAMSEnfocus

            Free Download

            Collapse

            Trade Show Survey=
            Instant October Trade Show Survey
            Come On! Only 5 Questions

            PRINT 19 and PRINTING United are squaring off in October.
            Will you be at one of them?
            Both? Neither?
            Please take our 1-Minute survey to tell us about your plans for the two big fall shows!

            Take The Survey.

            CanonXeroxSmartsoft (Presswise)DuploAvantiGraph Expo4OverKBAAMSAvantiEnfocusGraph Expo

            What's Going On

            Collapse

            There are currently 5460 users online. 104 members and 5356 guests.

            Most users ever online was 6,855 at 12:33 PM on 06-06-2019.

            Working...
            X