Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Prinergy upgrade Tips

Collapse
CanonKonica Minolta
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Prinergy upgrade Tips

    Going to do the upgrade myself next Saturday from 3.1 to 4. Any thing to look out for or that I should know? Tips or advice?

  • #2
    Re: Prinergy upgrade Tips

    There is a wealth of information here:

    http://www.mygua.org/forums/

    We're holding off on that upgrade for a few months as it is still in limited release. If you have a contract with Kodak I'd recommend opening a call with RC and have them do it remotely. If not, the GUA forums have plenty of information - latest version is 4.0.2.1c. Good luck!

    Comment

    4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
    4OverStandard FinishingDuploAleyantCanonGraph ExpoLabelexpoKBAKBASmartsoft (Presswise)Chili publish4 Pees

    What's Going On

    Collapse

    There are currently 4726 users online. 97 members and 4629 guests.

    Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

    Working...
    X