Standard Finishing
Xerox4Over

Announcement

Collapse
No announcement yet.

Help please: creo Scitex dolev 4 press V setup

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help please: creo Scitex dolev 4 press V setup

    I'm new in this domain,
    I have, used creo Scitex dolev 4 press V
    please help me to inderestand how can i connect my PC (win xp) to the SFL PCI interface card of scitex for the dolev 4 press V image setter.

    i have:
    Dolev 4 press V image setter
    SFL PCI not installed in my PC (win XP) (i have'nt CD driver or software: please tell me what is a nessessary driver or & software?, (in win XP =>> new device found, PCI Bridge Controller..)
    I have the optical cable connected to the image setter.
    I have a RIP Xitron Harlequin version 7.0 and his dongle.

    I have'nt manuals to set up, (please send me copy's if you have or links.).
    THX in advance for your help.

  • #2
    You can't use the SFL PCI card with a PC...

    two choices:

    1) Mac G4 or older (not G5, not Intel) and Creo/Scitex software rip PS/M v7.1 or earlier (not PS/M v8), then you can use the SFL PCI card and fiber optic connection.

    2) PC with Harlequin, that requires a different card and cable, either from Highwater (discontinued now), from Compose, or from Xitron (latest models are USB external interfase boxes). And the cable will connect to a port in the back of your Dolev 4press.

    (there's a third choice that's a TurboScreen board but that also requires a Mac G4 and PS/M so no advantage over your current position).

    -- Roberto

    Comment


    • #3
      Thanks Roberto.

      - In PC: (in win XP =>> new device found, PCI Bridge Controller..) i have'nt any chance in pc with the same card and cable? ....

      If i use i use MAC:
      - if i use PS/M v7.1 , this rip can detect my card without driver? (i have'nt).
      - can i use it in virtual machine like vmware or other? (in virtual machine, can it detect a card?)..

      Thx again ..
      EROS

      Comment


      • #4
        1. SFL card and cable in the PC will NOT work.
        2. SFL card and cable in the MAC G3 or G4(as mentioned by Roberto) - will work without the driver, it will be automatically detected by the Mac. Virtual machine will not work either...

        Comment


        • #5
          Thanks Osmand,
          Please, can i use harlequin rip MAC version on Mac G4 with my Card and cable and my imageStter?

          Comment


          • #6
            Hi Zitari,

            For u to setup what u have, u only need a PSM Rip 7.x. As mentioned by other colleagues, yes, SFL card will just work on G3 or G4 (both Macs), just insert to any pci slots then it should auto detect your card but to confirm if your card is working or not, u should have PSM 7.x installed. But i suggest to get a G4 at least. Then harlequin has a diff interface card which SFL is not compatible with.

            Let me know if u need a PSM, i might be able to help u to get an authenticated PSM RIP.

            By the way, where's ur location? Thanks

            Regards,

            onevon2k

            Comment


            • #7
              dear we have got a dolev 800 which came with brisque 4.01 rip as we dont have the password and login id , we thought we will install PSM on G4 and take the FSL card from brisque install in G4 to connect but there is no communication happening may i know what would be wrong.

              Comment


              • #8
                hi morgan,

                u can use the brisque, u can login by typing this: cdesci then enter....try it.

                then if u will use psm, can u give me more details when u say no communication....

                on PSM, did u connect by: going under SETUP menu, go to CONFIGURATIONS, then a window will pop out, then u can see if it detects the dolev 800, u should see it... thanks

                btw, where's ur location? Thanks
                Last edited by onevon2k; 03-22-2010, 05:55 AM.

                Comment


                • #9
                  Thanks,

                  I installed PSM RIP 7.0 on Mac G4, i Installed the SFL PCI Card, but i don't found "Configuration" in the setup menu !! (else no "select" menu)

                  I installed the SFL PCI card in PCI slot, (in mac G4 devices, it reconnised as "PCI connector", Model 5053,)
                  help Please
                  Last edited by elyes.zitari; 03-31-2010, 05:44 AM.

                  Comment


                  • #10
                    Originally posted by morgan View Post
                    dear we have got a dolev 800 which came with brisque 4.01 rip as we dont have the password and login id , we thought we will install PSM on G4 and take the FSL card from brisque install in G4 to connect but there is no communication happening may i know what would be wrong.
                    Hi, factory password for login in Brisque is: cdesci

                    Comment


                    • #11
                      The Same Problem

                      Originally posted by morgan View Post
                      dear we have got a dolev 800 which came with brisque 4.01 rip as we dont have the password and login id , we thought we will install PSM on G4 and take the FSL card from brisque install in G4 to connect but there is no communication happening may i know what would be wrong.


                      Dear Morgan,

                      do you solve the problem, cause i have the same problem
                      could you help please

                      regards

                      Comment


                      • #12
                        thank you all

                        Dear

                        i like to thank you all for the reply and help,
                        we could install psm 7 on Mac g4 with the same bisque AFL card installed on macg4, the problem was only because we have not installed the software properly, and there was some problem with Optical fiber cable. when we changed the cable and installed the sofware properly, it started working.

                        thank you once again.

                        Comment


                        • #13
                          The password is cdesci

                          Originally posted by morgan View Post
                          dear we have got a dolev 800 which came with brisque 4.01 rip as we dont have the password and login id , we thought we will install PSM on G4 and take the FSL card from brisque install in G4 to connect but there is no communication happening may i know what would be wrong.
                          cdesci is the password

                          Comment


                          • #14
                            Originally posted by elyes.zitari View Post
                            Thanks,

                            I installed PSM RIP 7.0 on Mac G4, i Installed the SFL PCI Card, but i don't found "Configuration" in the setup menu !! (else no "select" menu)

                            I installed the SFL PCI card in PCI slot, (in mac G4 devices, it reconnised as "PCI connector", Model 5053,)
                            help Please
                            try installing psm rip 7.2 and if you have installed properl it should work, check the optical cable is that working fine.

                            good luck

                            Comment


                            • #15
                              Lazer Calibaration erro

                              dear all
                              All of suddenly i can see Lazer calibiration error when we shot the job to the image setter, and when we did the lazer calibiration manualy it could pass 400 when we gave 450 and above it gets fail, any one can help us.

                              This is Dolev 800 1996 model.

                              thank you
                              Morgan

                              Comment

                              KBASmartsoft (Presswise)DuploXerox4OverCanon

                              Zero Setup Time

                              Collapse

                              Zero Setup Time:
                              Myth Or Reality?

                              As the twenty-first century opened, Koenig & Bauer had already anticipated the need for the coexistence of conventional and digital printing, and had begun to develop the technology that is today empowering offset printers to meet those challenges.

                              Read the Article.

                              Smartsoft (Presswise)KBAXerox " "DuploCanon4OverNeopost

                              What's Going On

                              Collapse

                              There are currently 6445 users online. 49 members and 6396 guests.

                              Most users ever online was 14,674 at 05:29 AM on 10-30-2019.

                              Working...
                              X