Standard Finishing
Xerox4Over

Announcement

Collapse
No announcement yet.

Dynastrip Creep setting

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jcallison
    replied
    Re: Dynastrip Creep setting

    We aren't using too many JDF impo's yet. In Dynastrip, we go to Job Definition/Definition/Pagination Seq. Def./ click Paper Thickness and enter the caliper and push-in button. I hope this helps.

    Leave a comment:


  • Lammy
    replied
    Re: Dynastrip Creep setting

    Jennifer where do you put the number in? in the JDF info or in the number box next to the paper thickness radio button?
    __________________
    Lammy

    EPP Manager • Brass City Printery
    OSX 10.4.10 • RAMpage 9.4 • Dynastrip 4.2
    EFI Colorproof XF • Avantra 30 • Epson 7600

    Leave a comment:


  • rich apollo
    replied
    Re: Dynastrip Creep setting

    Leave a comment:


  • jcallison
    replied
    Re: Dynastrip Creep setting

    Our job planners find out from the paper company the caliper of the paper. It's usually some number like .0039". That is what we put in for paper thickness. Dynastrip does the math and push-ins based on that.

    Leave a comment:


  • Lammy
    started a topic Dynastrip Creep setting

    Dynastrip Creep setting

    When defining creep , if I choose paper thickness where does it get that number from? The JDF settings? There were some equations in the manual that I quite didn't understand if there were for how to figure the maximum or were showing you how to figure paper thickness? Then again it was late and I hadn't been drinking so that could have added to my confusion.

    _______
    Lammy

    EPP Manager • Brass City Printery
    OSX 10.4.10 • RAMpage 9.4 • Dynastrip 4.2
    EFI Colorproof XF • Avantra 30 • Epson 7600

    Edited by: Lammy on Sep 7, 2007 1:42 PM
CanonKBAAvantiSmartsoft (Presswise)DuploEnfocusXerox4Over

Canon Embellishment White Paper

Collapse

Print Embellishment Goes
Straight To The Bottom Line

InfoTrends reported that interviews with more than 100 print customers demonstrated an appetite and willingness to pay premiums of 24% to 89% for special effects, over CMYK-only printing. They also indicated embellishment could apply to a significant portion of their work. Embellishment options can include hot foil stamping, spot gloss UV, embossing, debossing, letterpress, diecut shapes, lamination, duplex, triplex, gold foil, silver foil, copper foil, white foil, black foil, clear foil, etching, and laser cutting techniques. Download The Free White Paper.

CanonSmartsoft (Presswise)AvantiKBAAvantiEnfocusGraph ExpoDuploXeroxChili publish4Over

What's Going On

Collapse

There are currently 4167 users online. 52 members and 4115 guests.

Most users ever online was 10,745 at 04:03 PM on 10-10-2019.

Working...
X