Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Using vendors other than Kodak for servicing equipment?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Using vendors other than Kodak for servicing equipment?

    Just wondering if anyone out there had any recommendations for tech support services for their prepress equipment (imposition proofing printers, color proofing printers, plate makers, etc.).

  • #2
    Re: Using vendors other than Kodak for servicing equipment?

    All the time. Why would anyone use Kodak?

    Comment


    • #3
      Re: Using vendors other than Kodak for servicing equipment?

      I agree, but do you have any recommendations?

      Comment


      • #4
        Re: Using vendors other than Kodak for servicing equipment?

        I am in NYC. I can recommend someone local for Tr-State area. Where are you located?

        Comment


        • #5
          Re: Using vendors other than Kodak for servicing equipment?

          We are in Central Maine.

          Comment


          • #6
            Re: Using vendors other than Kodak for servicing equipment?

            What kind of equipment do you have?

            Comment


            • #7
              Re: Using vendors other than Kodak for servicing equipment?

              Well, currently we are using Epson for color proofing, Iris 43wide for imposition proofing, and are using Trendsetters for CTP. We are currently looking into new imposition proofing equipment and color proofing equipment. We haven't solidified any choices yet, so I guess we were just wondering if there was a company that does it all. If not, what would you recommend for new proofers?

              Thank you, please drive through.

              Comment


              • #8
                Re: Using vendors other than Kodak for servicing equipment?

                I sent you an email. I am using gmg to drive my Epson. What is your front end? For impo proofing I have hp5500 with Spinjet and I am very happy with that. Tried DoubleProof and hate it.

                Comment


                • #9
                  Re: Using vendors other than Kodak for servicing equipment?

                  We're using Prinergy Connect and Dupont Chromapro to drive our Epson 10600 for color proofing and using an Iris 43 Wide for impo proofing.

                  Comment

                  UltimateDuploSmartsoft (Presswise)Standard FinishingKBA4Over
                  UltimateDuploStandard FinishingKBAKBA GTIChili publish4Over

                  What's Going On

                  Collapse

                  There are currently 4048 users online. 93 members and 3955 guests.

                  Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

                  Working...
                  X