Standard Finishing


No announcement yet.

HP DesignJet 5500 - Spinjet not flipping

  • Filter
  • Time
  • Show
Clear All
new posts

  • HP DesignJet 5500 - Spinjet not flipping

    In continuance of this older post at:

    We are getting A "Spinjet Error 07" on the HP 5500 screen readout and the job sits in the flipper. It won't flip the sheet to re-feed so it can print the other side. Right now, we reset the spinjet flipper, the sheet drops out, we reload the sheet as "sheet" (not roll), then it print the other side.

    We then have to reload (roll setting) for the next job.

    Anyone know what "Spinjet Error 07" is?

    Why would it not continue? Should something be adjusted. We don't see any loose parts, belts, etc.

  • #2
    The spinjet needs re adjusting the spinjet is too low for the HP designjet and there is too much tension on the motor inside the spinjet, You will need to contact a approved Spinjet Engineer


    4OverStandard FinishingDuploSmartsoft (Presswise)CanonKBATharsternAvantiXerox

    Presswise Article


    Automated Order Status Tracking
    In PressWise Workflow Solution

    Presswise order status
    Quick overview of the order status tracking feature on PressWise’s automated workflow solution

    Link to Video

    4OverStandard FinishingDuploCanonSmartsoft (Presswise)TharsternKBAAvantiUltimateXerox

    What's Going On


    There are currently 5698 users online. 96 members and 5602 guests.

    Most users ever online was 6,597 at 10:25 AM on 04-20-2018.