Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

CID Identity H fonts

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • CID Identity H fonts

    Do CID Identity H fonts cause problems with anyone? Before we went direct to plate we had problems with crashing going to neg. I think they may still be causing some problems. Is there a way to change them in the PDF?

  • #2
    Re: CID Identity H fonts

    If you are having problems with CID fonts, it means you are using a VERY OLD
    RIP (or other PDF processing solution).

    CID fonts have part of PDF since PDF 1.3 (Acrobat 4). That's over 10 YEARS
    that the technology has been part of the standard.

    If you have a tool that doesn't support it - RUN(!) do not walk away...

    Leonard

    Comment


    • #3
      Re: CID Identity H fonts

      I agree with Leonard, its time to upgrade your RIP. We too had problems with CID fonts in PDFs when dropping to a Hot Folder for our RIP. Often, we could work around this by placing the PDF in InDesign and printing from there (I'm a old school Command-P pusher, I print separations to my RIP).

      Upgrading our RIP a couple of years ago resolved the issue when dropping PDFs into a Hot Folder.

      Comment


      • #4
        Re: CID Identity H fonts

        Thanks. I do know that our rip is new. But, our newsroom makes a PDF of every page using PDF Maker to send down. I think the PDF Maker could be causing the problem.

        Comment

        UltimateDuploSmartsoft (Presswise)Standard FinishingKBA4Over
        UltimateDuploStandard FinishingKBAKBA GTIChili publish4Over

        What's Going On

        Collapse

        There are currently 4928 users online. 105 members and 4823 guests.

        Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

        Working...
        X