Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Setting up additional media

Collapse
CanonKonica Minolta
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Setting up additional media

    I have been working in Rampage 9.4 for a few years now and we've always just had one plate size. Now we are getting a new press with another plate size and I have been trying to set it up myself but I am getting an error saying Non_device error during plot. too many scan lines. I do not have tech support anymore. Can anyone help me with this? Much appreciated!

  • #2
    Re: Setting up additional media

    try here, only rampage people in this group and they are GOOD:
    http://tech.groups.yahoo.com/group/r...kflow/messages

    Comment


    • #3
      Re: Setting up additional media

      Thank you!

      Comment


      • #4
        Re: Setting up additional media

        have you setup the new plate size on the saber and read the profile in on your shooter?

        Comment


        • #5
          Re: Setting up additional media

          I thought I did, but I must have missed a step.

          Comment

          4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBAUltimate
          4OverStandard FinishingDuploAleyantCanonGraph ExpoLabelexpoKBAKBASmartsoft (Presswise)Chili publish4 Pees

          What's Going On

          Collapse

          There are currently 3611 users online. 89 members and 3522 guests.

          Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

          Working...
          X