Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

-5v Power Supply [Screen PTR8100]

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • -5v Power Supply [Screen PTR8100]

    Hi,

    Does anyone know where to purchase a -5v Power Supply and the Cost?

  • #2
    You can use any 5 volt power supply with similar specs, but 9 times out of 10 the power supply is not bad, it's dirty optics.

    Comment


    • #3
      I think its the power supply, since it was giving -5v Power supply errors previously, I check the multi meter values comes as 0. plus green LED not working as well.

      Comment


      • #4
        Check pair of cables X807. They are uses to send power on signal to power supply. If contact is missed, power supply don't power on.
        You can short that contacts (with jumper) on power supply for test. If green LED has turned on - problem in this cables.
        Last edited by Benjamin Taylor; 05-31-2018, 05:06 AM.

        Comment


        • #5
          Yeah. We tried it benjamin it seems like problem with the head board 1. Tried the sensor errors, will try replacing the board.

          Comment

          4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
          4OverStandard FinishingDuploAleyantCanon Graph Expo4 PeesGTI

          What's Going On

          Collapse

          There are currently 3435 users online. 45 members and 3390 guests.

          Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

          Working...
          X