Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Scratches on the super blue net.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scratches on the super blue net.

    Hey. I print on paper 170-250 grams sometimes there are scratches. Cardboard 0.3-0.5 millimeters even more and more often scratches, scratches on the super blue net, net new clean. Printing on Speedmaster 102 sm 5+lac.

  • #2
    my guess
    https://printplanet.com/forum/press-...d102-and-sm102

    Comment


    • #3
      Still opinions of printers are interesting Speedmaster SM 102.

      Comment


      • #4
        Make sure the net is not too much stretched or otherwise you may get marking.
        Asif Qazi
        www.facebook.com/printindustry

        Comment


        • #5
          Yes, I tried to loosen the net tension, then you get a fold and scratch the thin paper, tighten the scratch more thick paper.

          Comment


          • #6
            You can name the brand of the grid super blue, there are several types, there are some that stretch, there are those that do not stretch.I use Super Blue, does not stretch.

            Comment


            • #7
              Can you post some pictures of the marks, may be the marks are from something other than super blue.
              Asif Qazi
              www.facebook.com/printindustry

              Comment


              • #8
                Also for the 0.3-0.5 board, the SM 102 is not good for heavy boards, because of the smaller cylinder diameters and its transfer cylinder system. CD 102 or XL are the right presses for heavier cardboard due to their sheet transfer system and double diameter impression cylinders.
                Asif Qazi
                www.facebook.com/printindustry

                Comment


                • #9
                  Are you using suction bars at the back edge of the sheets at transfer cylinders?
                  Asif Qazi
                  www.facebook.com/printindustry

                  Comment


                  • #10
                    Originally posted by aqazi81 View Post
                    Are you using suction bars at the back edge of the sheets at transfer cylinders?
                    They are not and have not been.

                    Comment


                    • #11
                      Originally posted by aqazi81 View Post
                      Are you using suction bars at the back edge of the sheets at transfer cylinders?
                      Suction bars might help you as long as they are operational. They need to be set up to the size your running on the older Speedmasters. The cam follower must be engaged, and the suction pump turned on for them to work.
                      Before doing all that you might want to just brush off the super blues with your hand to dislodge any dry ink buildup. You will often see a heavy buildup on the edges where large width sheets will be affected.

                      Comment

                      UltimateDuploSmartsoft (Presswise)4OverStandard FinishingKBA
                      KBAKBA

                      What's Going On

                      Collapse

                      There are currently 4403 users online. 106 members and 4297 guests.

                      Most users ever online was 6,151 at 11:36 AM on 11-17-2017.

                      Working...
                      X