Standard Finishing
Xerox4Over

Announcement

Collapse
No announcement yet.

Ryobi 925 Console CPU Error

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ryobi 925 Console CPU Error

    Hello
    The computer console on my Ryobi 925 has been giving run time errors and hangs up. Can anyone help me on what I can do solve this issue besides buying a new CPU from the manufacturer.
    Regards

  • #2
    Hi sir:

    Please Reset the Cpu:

    1) make a bridge between a) RST pin vs b) Grnd. look in the Google for Pins schematic according with his CPU or MicroProcessor.

    2) Test the power supply for his CPU or Microprocessor maybe +5Vd or +3.3Vdc depend of the generation of Processor.

    3) Test the clock en Mhz of MicroMicroprocessor.
    4) Clean very well Edge connector from Electronic board, with specia spray contacts.
    Blessing
    superchock@yandex.com
    Mobile+WhatsApp:+505 8861 1441

    Comment


    • #3
      Is it possible to buy any PC (off the shelf) and use that to run the machine. Where can one get the software from?

      Comment


      • #4
        You can get from RYOBI, only or you know someone that has this software.
        Did you test my steps that i did recommend you??
        I am attaching schematic how to Reset the Cpu.

        Blessing

        superchock@yandex.com
        Mobile+WhatsApp:+505 8861 1441
        Attached Files

        Comment


        • #5
          Yes we are able to reset and then the error goes away but then comes back again and every time the machine has to be stopped for the computer to be reset/reboot. I am trying to find a way to upgrade the computer to a new off the shelf computer.

          Comment


          • #6
            Replace the complete CPU board, whoever you must test the:
            1) Power supply of Cpu , Before to replace it
            2) Test the clock for CPU, before to replace it, VERY IMPORTANT.
            Blessing

            superchock@yandex.com
            Mobile+WhatsApp:+505 8861 1441


            Comment


            • #7
              IT seems the computer has developed some error - we are now getting the blue screen while booting. Ryobi just says to buy the new computer from them. Can you suggest a solution.

              Comment


              • #8
                There is error code on blue screen - explains what might be a problem. What is that number?

                Comment

                KBASmartsoft (Presswise)DuploXerox4OverCanon

                Zero Setup Time

                Collapse

                Zero Setup Time:
                Myth Or Reality?

                As the twenty-first century opened, Koenig & Bauer had already anticipated the need for the coexistence of conventional and digital printing, and had begun to develop the technology that is today empowering offset printers to meet those challenges.

                Read the Article.

                Smartsoft (Presswise)KBAXerox " "DuploCanon4OverNeopost

                What's Going On

                Collapse

                There are currently 8307 users online. 102 members and 8205 guests.

                Most users ever online was 14,674 at 05:29 AM on 10-30-2019.

                Working...
                X