Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Gallus RCS 330 and CTP

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gallus RCS 330 and CTP

    Hi. Trying to find info on a suitable CTP device to supply plates for a Gallus RCS 330. Having problems finding a CTP device that has
    in line punching that can punch on the narrow edge of the plate which is 362mm. Any input please.

  • #2
    Re: Gallus RCS 330 and CTP

    Have you tried to get you plate supplier to pre-punch them to work on any CTP system.

    Comment


    • #3
      Re: Gallus RCS 330 and CTP

      Hi Jay.
      Thanks for your input. Have spoken to plate supplier about pre-punch but not possible due to quantities, etc, etc.

      Comment


      • #4
        Re: Gallus RCS 330 and CTP

        Hello, Gaz,

        I do not have exact plate dimension for RCS 330 available, but, I believe, Heidelberg Suprasetter A74 might be worth of look:
        HxW from 240 x 240 millimeters (9.45 x 9.45 inches) to 670 x 750 millimeters (26.38 x 29.53 inches).

        AFAIK, there is standard punch available to be mounted on width of 220mm, but there is possibility to order customer specific punch (might take longer to be produced).

        Anyway, have a word with your local HD representative.

        Regards, Janez

        Comment


        • #5
          Re: Gallus RCS 330 and CTP

          Hi Janz.
          Thanks for your input. Will look into it.
          Regards
          Gaz.

          Comment

          4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
          KBAKBA

          What's Going On

          Collapse

          There are currently 4476 users online. 97 members and 4379 guests.

          Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

          Working...
          X