Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Epson 7900 issue

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Epson 7900 issue

    I have owned a Epson Stylus Pro 7900 for the past 6 years and it has worked flawlessly till last week.

    I had a paper jam(not the first time) and since then when I send a job to it the print head travels side to side along the whole length of the track regardless of what size paper I set it up for and the paper does not move. The printer loads paper normally(both roll and sheet) and cuts normally.

    I am at a loss to diagnose the problem

  • #2
    Is it by chance trying to do a calibration? Not a color calibration, but another calibration of some sort. I had an Epson that was traveling the whole length of track side to side, regardless of paper size, because it was doing a calibration - and it was after a paper jam. I kept stopping the printer because I thought it was stuck in some kind of goofy mode but, after Googling my problem, I found out I had to let it run its course and then it was fine.

    Comment

    4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
    4OverStandard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA

    What's Going On

    Collapse

    There are currently 2900 users online. 44 members and 2856 guests.

    Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

    Working...
    X