Standard Finishing
Xerox4Over

Announcement

Collapse
No announcement yet.

Vutek QS2000, 3 new mag heads, voltages right- printing striped/banded...

Collapse
Canon
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vutek QS2000, 3 new mag heads, voltages right- printing striped/banded...

    put 3 new heads in for Mag. if voltage is set where the head says it should- i get overspray. had it set about 1.5 volts under and printed 15 sets of 4x8 no issue... now printing these- this is 3up on a 4x8...seems like Mag is dropping out by end...pics are in reverse order of how they printed.


    I went through and did the bidirectional and step cals.... jet test looked good... kinda tearing my hair out over here....

    Any Suggestions?

    Thanks in advance!!
KBASmartsoft (Presswise)DuploXerox4OverCanon

Zero Setup Time

Collapse

Zero Setup Time:
Myth Or Reality?

As the twenty-first century opened, Koenig & Bauer had already anticipated the need for the coexistence of conventional and digital printing, and had begun to develop the technology that is today empowering offset printers to meet those challenges.

Read the Article.

Smartsoft (Presswise)KBAXerox " "DuploCanon4OverNeopost

What's Going On

Collapse

There are currently 8308 users online. 102 members and 8206 guests.

Most users ever online was 14,674 at 05:29 AM on 10-30-2019.

Working...
X