Recent content by ANDERSON 1958

When I turn the press on the tray will rise to the top. Not the anti crash sensor. changed the pertomitor (sorry I know this spelt wrong) infa red and base reflector seem ok so I guess it is the board. Hopefully someone has had this problem as I don't want to spend loads on a new board id not...

I am after a long sheet uncoated 120 gsm stock running as work and turn. Generally side 1 is ok but second side gives problems. Premier were supplying avoset and arcoset but have reduced the range of weights. It seems the suppliers have no interest in the 700x330mm size and having to buy a...

When finishing for example a 24 pp a5 booklet 300 gsm cover 150 gsm text we are getting cracking down the spine, finished om a morgana. Also for example when cutting 400 gsm business cards the cards split around the outside even with a new blade. Using different stocks will sort the problem but...

Thanks for the replies. shawnd I did take the rust remark seriously so thanks. The problem is more noticeable on heavy stock, the marks are made up of all colours. Top tech gave me this as a souloution settings for background 29,30,35,36,37,38 increase these settings by 10 ie -70 to increase...

Got some rust on my Indigo but that is 13 years old. No not rust Shawnd:rolleyes:

I am getting alot of background dirt/ noise /toner dust in the non print area of the paper. I have been given some settings to try and they reduce it slightly. The press is not in a controled enviroment. Any suggestions would be most welcome.

Thanks for that Tom. I am on holiday at the moment and will get back to you. Did you ever use the indigo users/ digital print republic forum, such a shame that Phil had to shut it down. Many thanks

Hi tpmar, I am in a similar situation as you, 20 years on Indigo series 1,2 &3 and have had 4 weeks on the 9100 sx. Just interested in how you are finding the back to front registration and how you set up for a heavy cover 350gsm and lighter 170gsm text inner page job. The training I got on...