Recent content by ansoft

  1. A

    Problem with halftone screens

    It looks like a problem with dirt of the mirrors. You can also check the rubber rollers and the tension of the film.
  2. A

    GLV for PRT 8900 S new, used or with defects

    buy a new one
  3. A

    Heidelberg Topsetter 74 error E41c0

    There is a small sensor on the head rails on the home side of the machine. Please check it.
  4. A

    CIP3 Files

    Normally, the RIP outputs this file.
  5. A

    Suprasetter 2540 laser resolution and Trueflow

    Unfortunately you do not have a solution with Trueflow and Suprasetter. You need to choose another RIP/Workflow system that can output 2540dpi.
  6. A

    Ep-b101 scsi box supported programs

    With this box you need Screen Trueflow or EQUIOS PT-R, Fujifilm XMF or AGFA Apogee. It is also possible HQ-RIP. It is impossible to use other software, because of the acknowledgment between the box and the software. Better find a PIF board and run whatever you want.
  7. A

    platerite 8600 MAL lift motor availability

    Unfortunately no :(
  8. A

    Screen 8600 EEPROM Writing Error

    Please check the head CPU board or the driver. Certainly reseat all the cables. Luck!
  9. A

    Screen 8600 EEPROM Writing Error

    Would you please write the exact number of the error?
  10. A

    ctp topsetter error E421e electrical error

    It is bad connection of the PIF cable, the PIF board (interface board), or broken cable. I am sorry but the technician told you the correct answer. Merry Christmas!
  11. A

    CREO LOTEM 400 XPO ISSUES

    I am sorry, but there is no chance to do it. You can change the harddisk and reinstall the GUI and install the backup registry again. Think about another CTP....
  12. A

    Prinergy Replacement

    Hi, You do not have many options for upgrade as you must drive the Trendsetter. StudioRIP is a good alternative, not as expensive as Fuji, Kodak, Agfa. Depends on the version of the Trendsetter, you can or cannot replace the Prinergy. If you need more information write me on personal messages.
  13. A

    Some Lines on Plate

    It could be the data cable to the head. It is very common problem on 4xxx Screen devices.
  14. A

    Some Lines on Plate

    If you try another batch, or another brand of plates, do you still have these lines? Probably, you need to make focus, zoom and drum rpm tests.
  15. A

    Ptr4300 Servo unit does not enter the "Ready" status

    Servopack is robust, check the drum motor. I have changed once, but servo pack-never!
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top