Recent content by BWI

Hi, We have a knife limit switch, used. Please contact us at [email protected] for pricing.

We do not have any experience in plate bending, so unfortunately I cannot give you input there. Looking at the the plates that we use internally for testing, they yield 200 LPI. I cannot speak for other plates, but if you talk to your local plate dealer they would be able to help. A silver...

We have had some Avalon LF come to us that had trays instead of a conveyors. That is why I asked the OP if he has a conveyor. If you look at the brochure for the Avalon LF, there are two options for plate unloading, either manual or automatic to an online processor.

Hi, You will be able to run your accuset with a Windows system, however you will not be able to use your existing RIP. We offer a Xitron RIP for the Accuset. This would be installed on a Windows 7 computer. Let me know if you are interested in finding out more about this RIP. Email...

Hi, We can offer you a used RIP for your DPM. Please contact us at [email protected]

Hi, I talked to my technician about this. His suggestion was that there may be something wrong with the computer. Have you tried defragging the hard drive? Also, check the interface cable connection. Otherwise, it may be the two boards that were mentioned, unfortunately. He does not believe...

I often use a hairdryer to warm up toner cartridges to extend their life. Maybe that would be a better method than the oven since you would have less chance of melting any plastic parts.

If you can, go back to the person that you purchased the equipment from and ask them for a copy of AgfaSet from the original system. This is a utility program that will allow you to control.

Hi, I spoke with my Agfa technician about this. First, you must have the software. Unfortunately you will not be able to connect to a Macbook Pro, however you may be able to connect using a G3. To do this you would need a network setup with an rj45 transciever on the star 600 and a hub for...

Since you do not already have a conveyor, one must be purchased and installed to go online to a processor.

Does your Avalon LF have a built in conveyor? It needs to have one in order to go online to a processor. We can help you with finding a processor to suit your needs. Please email [email protected]

It sounds like it could be one of the motors. You can email me and describe your problem at [email protected] Our technicians can help you diagnose which part may be causing your problem.

We are looking for a Thermoflex Narrow Hybrid offset plate kit. Does anyone have this available or know of a source for one? Thank you so much for any help!

Hi, It can be beneficial to upgrade to CTP in the long run, especially if your CTF equipment is getting old. There are many things to watch out for when buying used equipment. A CTP system can be a large investment, and you need to know all factors that may affect the machine in the future...

I suggest Hydra Sprint V2, which is specifically for processors. It is a foaming spray cleanser.The sprayer that they sell is required to make it foam, so don't just get the refill. This cleaner is the best universal cleaner that we have found so far. There are also other processor cleaners on...