Recent content by Dersu

  1. D

    Is ESKO running away from the commercial print market?

    Artpro still needs fixes and improvements. Packedge is powerful and solid editor which has great and fast tools. Interactive trapping and pair selection is one of them for example. We tried artpro for prepress stages, some artwork files is impossible to trap, artpro waits at preparing...
  2. D

    GMG exchanging profiles?

    I know this is a very old topic, but my question basically the same with different findings about results. We are using version 5.4.2 and creating lots of custom mx4 profiles. Our printer is Epson 4900 and Gmg using mxc printer calibration set. Our customer using more or less same set up...
  3. D

    CDI Advance Cantilever 5080 & Dupont 2000 Series

    As title says; We are selling our CDI Advance Cantilever 5080. Grapholas Version is : 12.1.1 Serial Number : 102088 Laser and servo controllers replaced by Esko ( not because of malfunction, because of old laser was at more than 11.000 hour). Servo replacement due to new laser type. New laser...
  4. D

    Automation engine error

    Either you're trying to rip an empty page or seperation, or your queue device is on hold.
  5. D

    Esko CDI Spark 5080

    CDI Spark 5080 has been sold. Thanks! Dersu
  6. D

    Packedge v7

    Which OS? v7 has problems with windows 7 and upwards. Try to run in compatibility mode. You have to select multiple exe files in (packedgexx.exe, xbrix***.exe etc) bin_ix86 folder.
  7. D

    Dupont Cyrel 2000 series Production Line;

    We are selling our Cyrel 2000 series production line; Dupont Cyrel 2000E Exposure Unit Dupont Cyrel 2000P Processor Unit Dupont Cyrel 2000D Dryer Unit Dupont Cyrel 2000LF Light Finisher Unit All units is in working order, in fact all of them is working everyday. So, if interested you can see...
  8. D

    thinking about buying a Flexo printer (details inside) , advice please

    IMHO, HP Indigo will be perfect solution for you.
  9. D

    Opacity masks from Illustrator

    As Simon said, you don't need to ungroup or release compound to edit things in PE. Use preset level to control selections.Use dual windows to control vector objects easier. PE has lots of selection tools.
  10. D

    Problem in flexo printing

    Measure the distance between problematic lines. Looks like this two artwork on the same plate? If so, it seems to me that distance between lines are same. If this is true, it's highly possible to be a gear markings! Also check your plate mounting tape.
  11. D

    WebCenter workflows

    Check this link; https://esko.app.box.com/suite14training/1/2007051865
  12. D

    Flexo ctp

    You're right, with pixel+ option we can create much finer microcell screenings. For an example; MC16 microcell screening creates 16pixel size microcells, with pixel+ you can create 1pixel size microcell screening. It's not for corrugated. For corrugated (especially post print) you don't need...
  13. D

    Flexo ctp

    Semi Gloss, bopp, water base & solvent inks. Our test runs for uv inks does not show enough density increase.
  14. D

    Flexo ctp

    Pixel+ option optimize the laser power output by using different pulse amplitude. In fact, HD flat top dot and pixel+ option are two different things. You can create flat top dot plates by using different techniques. But if you want to use finer micro cells for density, you need to have pixel+...
  15. D

    Flexo ctp

    If you really want to compare, get some benchmark plates > print and check. Otherwise you will hear lots of speculative comments. We are using four Esko CDI 5080. Two of them HD certified&Pixel+ installed. Just remember, all kinds of CtP hardware needs rip or workflow solution. Esko has strong...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top