D
Reaction score
0

Profile posts Latest activity Postings About

  • Dear Sir,

    I have Select Set 5000 since last 3yrs, works fine, but last week it give me error 28 during booting, and also don't image data on film, some times when image comes it looks like zigzag or lines on the film.
    We don't have any certified engineer for this machine, kindly help....and suggest.

    Best Regards
    Adnan
    T
    Hi Mr Block.
    We are looking to buy a computer to metal plate system and are considering the G&J Platewriter 2000. the question we have is whether the print heads clog or if sitting unused for long periods will be a problem. We are a very small shop and don't use our platemaker every day/week. Thanks Scott
    Hello Mr. Block,
    We have an Avantra 30 OLP and are very interested in going to poly plates. It appears through the threads I have seen that you have a tremendous amount of knowledge and expertise around this process so we come to you for some information please. We have been told that the plates will image fine but cant run through the OLP due to bath depth, abrasiveness of the rollers and the like. Is this true and if so is there a fix for this? Max sheet size for us is 19 x25 but we run the bulk of our work on a 14 x 20 format and we do run quite a bit of higher end pleasing 4cp work. Any information would be greatly appreciated on success or lack of using this imagesetter for poly plates.
  • Loading…
  • Loading…
  • Loading…

Automatically Autonomous Automation

Automatically Autonomous Automation
Although the autonomous car is not quite ready, a lights out print operation is something you can do right now if you have a comprehensive Print MIS (Management Information System). The advantages can put money on your bottom line. So what’s your next step? Link to Article

   
Top