Recent content by Forrest M

Does anyone know of/have recommendations of machines that will weld vinyl banner edges and grommet them at the same time?

Do you know of any AQ specific machines? I seem to only be finding UV machines.

We are looking to get a coating machine to try out a variety of different coatings. Can you use aqueous coatings in UV coaters such as the Duplo Ultra 200 PRO UV Coater ?

We have always used Epson 7880s converted to use sublimation ink, however we have switched over to Epson F6200s about a year ago. I thought that the color would hold better on the F6200's since they are made for sublimation, but the drift is way worse on them. It seems completely random, the...

We've been using DyeTrans Hi-Res SublimationPaper for our hard substrates and TexPrintXP Sublimation Paper for our softsubstrates with our Epson stylus pro 7890's for a few years now. However we just bought an Epson Surecolor F6200, so now I'm looking into what papers to use for that. The...

I was just looking at some specs for the mutoh rj900x vs our epson 7890's and it looks like the droplet size of the rj is smaller than the 7890(3.2 picoliters vs. 3.5 picoliters). Looks like they can both print at 2880 dpi. To me that would mean that the rj would be able to print with equal...

We currently use epson sylus pro 7890's but since they tend not too last forever under heavy use and it's getting harder and harder to find replacements, we are looking at different printer models to replace them. We are a photo lab that for dye sub mostly print smaller hard substrate...

the cmyk+4 is a possible option that I can select from in I profiler, but if I select the printer it comes up as just cmyk

It a 9 ink printer. I profiler told me it was a cmyk. I tried profiling it as an rgb printer first and the blacks came out looking very blue/purplish

The output profile is one we created through i1profiler. We're printing on an Epson S80600 solvent printer. Using a perceptual output intent. We're printing fine art canvas prints.

I've noticed a dramatic improvement in image quality when I changed the input profile in onyx to BigRGB from the use embedded profile that it was automatically set to. When I have it set to use embedded profile everything has a slight washed out look to it. Although from reading comments on some...

Has anybody had any luck with printing on wall tex type material or particularity optima opt-solve economy wall tex on a solvent printer. I've just started trying to build a profile for it on an epson S80600, however the preliminary prints I've tried with a bunch of different base medias(all the...

I was able to fix the gradation problem but not every profile I make has the dark blacks coming out with a strong purplish tint. Any suggestions for how to fix that?

I recently purchased an Epson s80600 solvent printer to mostly do fine art canvas prints. I've now run into some problems getting a good profile on it and was wondering if anybody might have any good input. I have now created profiles with the help of i1profiler and completely through onyx...

We just got our new epson s80600 in this week. Gamma print does have media manager and job editor. I created a profile with i1 profiler through the media manager but the test print I did with the profile came out looking pretty muted. I'm not sure but I think it's only using 4 colors for the...