Recent content by jhm

You ever try belt dressing. Just spray the back side of the belt.

Ok the pawl and rachet. I'm not sure they have ever been set up correctly. When the Pawl engages the rachet gear it seems like to long a stroke causing to much rotation of the in ball then applying tp much ink. How do I set it up so the Pawl only rotates the cam a small amount. We get by doing...

I haven't pulled the ductor out but yes to your first 2 questions. No to your 3rd question. Because once the rachet engages depending where the ink ball cam position is that determines how much the ball moves with the rotation of the press..Just making sure here. This ball speed is controlled by...

Hey Alois Thanks for the reply but my issue isn't the doctor setting. There's a timing issue where the ductor hits the ink ball. The ink ball has some type of rachet gear in operator side door that has to be engaged as the doctor hits or the ink ball will spin backwards. But also that rachet...

I've never had to adjust the ink ball rachet timing. When the ducter hits the ink ball it moves way to much much even with the ink ball speed set at 1. If anyone knows the set up procedure it would be much appriciated. Sorry if my terminology is incorrect. I also looked in the press manual and...

Yes I'm sure. I was getting a consistent mark and e-stopped the press. When I looked at the printed web that was in the press the marking was from the former board back to the tilt-box which is roughly 30' fro the ovens. When I hit my e-stop it takes about 30' to come to a complete stop. I...

Hey guy's I'm having issues marking in my ovens on the lower side of the web. There's no marking at make ready speed but around 800 fpm marking gets really bad. When I open the oven doors and inspect the web all looks good. There's a nice wave threw the nozzles and doesn't seem to be touching...