Recent content by Motoxslow

For replacing feeder belts on printing and bindery equipment. Included in the kit is the heated belt press, one bottle of unopened adhesive and one half full bottle of adhesive. (1) unopened 1.5oz of adhesive 118N included. (1) plastic container is half full of fixol. (1) original instruction...

Package for sale contains the following; (1) S/W license PreInterf. 52 version (this item would need to be replaced to use the software on a press larger than the 52) (1) Prinect Prepress Interface (1) Omni Drive USB LF (1) Cable (6) Memory Cards 00.783.0632 (1) Dongle Prepress Interface (1) CD...

Package for sale contains the following; (1) S/W license PreInterf. 52 version (1) Prinect Prepress Interface (1) Omni Drive USB LF (1) Cable (6) Memory Cards 00.783.0632 (1) Dongle Prepress Interface (1) CD Prinect Prepress Interface 3.3 Software (1) Install and Operating Manual Dongle...

Our demise could be your gain. Well maintained equipment needs new home. Besler high-volume shrink wrap machine Model T-18-8 and 2420 EM-SL MBO B30 Perfection Series folder with 8‑page right angle Macey 562 Saddle Binder with 3‑knife trimmer, cover feeder and hand feed section ASTRO...

Re: Azura plates run length issues A few more notes about the conditions of the press and such to consider. 1. We tend to run the ink to plate stripes on the light side as the R300 tends to streak in solids with "normal" ink stripes. No ink roller with the exception of the water roller is set...

Re: Azura plates run length issues Same inks and wash-up solutions, different fountain solutions. We have tried a few others with the same results. It happens most often on the black unit as we run black down first. Cyan also breaks down, especially if there is lots of ink coverage. It also...

Re: Azura plates run length issues It seems to be isolated to our MAN 300. Been all over the packing, blankets, roller preasure, roller side play, even had outside service check it out. No problem found with the press. Press prints fantastic and does not break down the image using other...

Hello everyone. I am just wondering if we are the only shop (AGFA tells us we are) that is having issues with the Azura plates breaking down on press after several thousand impressions. We have been running the plates for several years now and the problem tends to come and go. Most of the time...

Re: TRUEPRESS 344 It is too bad because the concept is awesome. Edited by: David on Jul 14, 2008 8:43 PM

Re: TRUEPRESS 344 I'll let it go. But you have to admit that you were wrong. Edited by: David on Jul 14, 2008 8:44 PM Edited by: David on Jul 14, 2008 8:54 PM

Re: TRUEPRESS 344 Just wondering, it seems you have a very favorable opinion of the TruePress. Is this from hands on experience with the press? I know of only a handful that have been installed here in the east coast and only 100% of them have been returned to Screen. Do you work for Screen...

Re: TRUEPRESS 344 Hello arif. Slow penetration in the USA as well. I wish you luck with your new press. I'm sure Screen is all over the dampening problem, they want this press to be successful. Hi Screen, what's up?

Re: Indigo 1050 - any user here? We have been using a 1050 for the past 18 months and both seejay and John are correct, although "Superb Quality" is a strech. You can get jobs off the machine that you can sell but it is very operator intensive. One thing I would add is that once you pick HP...

Re: TRUEPRESS 344 Hey guys, just found this site while searching for info in the TruPress 344. I have been comparing the available Di's in the market and the Screen keeps coming out on top. I just signed the contract for one last week and it will be installed Jan. 7th. This was a very...