Recent content by Paperboy

  1. Paperboy

    Techorans cut out

    Hi just to let you know it was a board in the cabinet
  2. Paperboy

    Techorans cut out

    Thanks for reply I will look into this Monday - this problem causes the press to freeze - also when all up and running somtimes I have to re boot because the duct roller will not spin ? Yesterday I came in and could move the tray in the feeder up or down ?
  3. Paperboy

    Techorans cut out

    Hydrostar compact alpha d
  4. Paperboy

    Techorans cut out

  5. Paperboy

    Techorans cut out

    I will send a pic tomorrow when I’m back in thanks
  6. Paperboy

    Techorans cut out

    Hi everyone I run a 5 col sm52 cpc and in the mornings on start up the techno rand cuts out at random moments any ideas ?
  7. Paperboy

    Heidelberg sm74 freezing???

    Ok update problem solved you have to replace brake and encoder at the same which we didn’t know as we’ve replaced the encoder before a few years back .
  8. Paperboy

    Heidelberg sm74 freezing???

    We know a few different guys that do that kind of work but are unable to test fit new boards unless we buy first but then there is no warranty so looks like we have to 1st get new brake 2 new encoder 3 new test fit board with Heidelberg it’s big cash but if they get it wrong it’s on them
  9. Paperboy

    Heidelberg sm74 freezing???

    If is the mother board + new brake +encoder through Heidelberg in the ball park of that sum
  10. Paperboy

    Heidelberg sm74 freezing???

    Thank you for this information I will check this out with the chaps I work with - we have a guy coming in on Monday I will show him this
  11. Paperboy

    Heidelberg sm74 freezing???

    The press stops suddenly - I just wanted help as we’re look at over £10,000 it might be small change to you but it’s not to us
  12. Paperboy

    Heidelberg sm74 freezing???

    Hi all I run a sm74 and randomly it freezes ether on crawl , wash cycle, running a job - we have to turn off press and reboot it sometimes it works sometimes we have to do this again and again it’s been narrowed down to a board in the cabinet but there not sure which one ,which is gonna do us a...
  13. Paperboy

    Speed master 52 packing slip

    Alois thank you for your input but all that is quite obvious I'm sure there are printers out there that don't do these simple checks ,I however am not one of these with out sounding rude I have however founds a cure for this strange problem which is finito packing
  14. Paperboy

    Speed master 52 packing slip

    I did think about the grain as I cut my stock packing myself from b1 in a rush as I get on the finishers nerves when I'm on the guilotine so I bought some more pre cut ,which didn't make any difference it's just weird weird because I've never had a problem before the tape seems to be working i...
  15. Paperboy

    Speed master 52 packing slip

    Thanks for your reply it's strange I'm all set at zero I always slightly under pack I use 2 sheets of 10 thou and 2 sheets of 12 thou I when through 5 sets on units 1+2 then in the end I have taped up the back edge on packing together and tapped it to the back of the cylinder when so far has...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top