Recent content by R&D

  1. R

    Binuscan cms server

    does anyone have an opinion about the binuscan cms server and workflow? I'd be grateful if I saw reviews about it... also, what kind of investment are we talking about? Thank you
  2. R

    Fuji RIP + grand sherpa proofer

    Will fuji rip support Mutoh RJ 8000 or falcon 2 for low resolution?
  3. R

    Celebrant 6.1 | Media Profiler

    While printing from Celebrant 6.1 Fuji RIP to our Epson sherpa proofer 9880, the lowest clickable resolution is 300 dpi (which is too high for a low resolution proof). How can we create a lower resolution in the Media Profile Characteristics of Media Profiler 6.1 ? many thanks
  4. R

    Fuiji Plates Uneven Quality results Faced

    job layout size shifts on CTP plates! job layout size shifts on CTP plates! It turned out the problems came from both lasers, which were changed. Soon after the laser problem was fixed, we encountere problems with different plate colors, which are differing one from the other (ex: cyan...
  5. R

    Black Magic

    anyone ever used BlackMagic? do you recommend it? we faced problem with the Fuji RIP calibration, it can only be done manually while trying to calibrate it on Epson 9880. We were told BlackMagic would solve that problem.
  6. R

    Calibrating the Epson 9880 proofer with a FUJI RIP

    you're right, turns out it's not true. both the sherpa 50 and epson 9880 will operate on apogee x. I was given false information. what about the Blackmagic software, are you familiar with it?
  7. R

    Calibrating the Epson 9880 proofer with a FUJI RIP

    We operate on a FUJI CTP. We decided to purchase a new proofer to complement our old one (Sherpa) to which we send files directly from our Agfa Apogee system. The most logical solution was to find a proofer that can directly operate from the Fuji RIP to avoid making the job twice. We were...
  8. R

    Fuiji Plates Uneven Quality results Faced

    same power supply same power supply both lasers are taken to the same power supply + data. yes they are using the same modulator.
  9. R

    Fuiji Plates Uneven Quality results Faced

    answer... answer... we did, same problem, dots density are inconsistent all over the plate, and variations are not in the same place. Fuji experts say it's a plate/imaging problem. Chemistry have been changed, same results. Plate Type: LPNV1. CTP system: Fuji 9600 VX. one expert says it...
  10. R

    Fuiji Plates Uneven Quality results Faced

    tone values on Fuji V1 plates tone values on Fuji V1 plates both, results were seen on the press, and while going backwards, we saw that when plates came out of the CTP they already had the problem.
  11. R

    Fuiji Plates Uneven Quality results Faced

    while running some tests on different Fuji plates (v1), we have experienced (CTP) uneven results in the percentage of ink coverage. What may appear to be 20% in some areas goes up to 35% in other areas. While Fuji experts are running some tests to find out what the problem is exactly, I would...

Canon Research

Canon
Advancing Productivity and Service Delivery
Enhancing the Print Customer Connection (Part 4)

Read All About It

 
Top