Recent content by Randall Ellersick

I am a Presstek Service Tech. Randy 808-202-0074

The Agfa Azura Plate and the Dotworks T-Green plate are the exact same plate. Power settings go down to the 48% range and stay there. The lasers become incredibly stable compared with the older style plates. I have converted 50 or more installations with little or no issues!! No RPM drum speed...

I am a certified Presstek Tech coming to the Central/ East Coast Next week. Anyone needing help with their Dimension’s or Calibrations, please don’t hesitate to call. Specialize in 3rd party Ctp plate calibrations and conversions. I get no kickbacks from Co’s or Suppliers! I have talked to...

There are many plates available for the dimension 400 series. I am available to help anybody interested in making this conversion. Randy 808-202-0074

I have installed the Azura style plates in over 5 installation. And have had nothing but fantastic results. The thermal green plate from Dot Works has performed flawlessly. Latser’s have remained stable with little or no adjustment in over four months. I grant you the initial adjustment are a...

The power settings on a TX 52 are done in the commandline in the start menu. You are basically accessing the registry of the CPU or OS. There are current settings in that area.

The issues with banding are a direct result of improper laser settings. I’ve battled this off and on on for five years. I developed a test target that simplify’s the Calibration. The wormdens target, is extremely hard to use with anything other than the anthem pro. I have now installed and...

I can offer an alternative to the azura plate. We consistently have installed Dot Works Thermal green plates in all the dimension. No issues have been reported. Laser power is often reduced to the 40% level. Dot Works pays for the conversion process. Plates often exceed 60,000 impressions...

I have installed thermal green which is made by Dot Works in 4 installation. One is the dimension 400 Series. The other three are dimension 425. no change in the machine, other than later setting. Which often go down into the 40% area! Total impressions are in the 70,000 range. We have had no...

Dot Works make a replacement plate called Thermal green. Impressions are up in the 70,000 area. No fountain solution to change or press roller. Power settings on the laser’s go down to approximately 40%! Wash out unit changes to a finisher. Dot Works pays the service tech to change The laser...

We have a version of that plate. They run very well. Obviously there are changes upon the way the press rolls up in the beginning.

The lasers settings are critical. Being that the dimension 400 has 16 later, the settings are important. I have done terrible. I have posted about this

There is a counter that you can reset to take care of that problem. It’s in the GUI

We install similar plates that are thermal. The laser settings are critical. Our plates get about 70,000 impressions. The laser settings are critical. Our plates get about 70,000 impressions. Extremely fast clean up compared to Presstek Anthem pro. I posted some info about them. We also have on...

They also have a version of thermal plates that are Insta print. Press clean up, No processing