Recent content by Rolf

  1. R

    New iMac's color calibration

    We also installed a new iMac and found the calibration in system preferences did not do the job. iMacs are known to be too bright. We started using a monitor calibrator (Eye One) but were unable to reduce the brightness with the supplied software. With additional software from Integrated Color...
  2. R

    can preflight check for white overprints?

    Illustrator CS4 has a "Separation Preview" window where you can turn "Overprint" on and off. Same applies to Acrobat Pro, the window is called "Output Preview". Rolf
  3. R

    Web Press Print to edge of sheet

    Web Press Print to edge of sheet My reply might be a bit late. We are a web printer and it is not common practice. It can be done, but the ink build up will mess up the edge of the sheet. Another solution is to cut the blanket to the size of the sheet. It is a way to save on paper, but there...
  4. R

    Serious Issue - Help Needed

    Scott, how did you rule out the processor? We have had similar issues twice after a prolonged down time and it was the plate chemistry that caused it every time. After a complete chemistry change everything was fine.
  5. R

    Xenith Rip Manager and Leopard

    Xenith RIP Manager and Leopard 10.5.8 Xenith RIP Manager and Leopard 10.5.8 We have the identical configuration and experience the same behavior. It looks like RIP Manager looses the connection with the RIP. Rebooting works, but it is a pain in the neck. Remounting the RIP drive on your...
  6. R

    Why are CTP plates still more expensive?

    Re: Why are CTP plates still more expensive? We just switched to CTP four weeks ago, one reason was cost. We pay less for the same size plate (different vendor). I think prices of equipment and plates will go down as the market gets more saturated and the price of analog plates will eventually...
  7. R

    Dynastrip

    Re: Dynastrip We used to have the same problem. Our vendor suggested creating different set-ups under "Output Device" (Destination, linescreen, etc.). The "Output Device" and "Plate" information will stay with the job after you have printed it. It worked so far for us.

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top