Recent content by roycagang

  1. R

    FT-R3050 (High Space & Calibration)

    If you can go to cut-line to change the space you can do it by putting the value to zero. From Ready F1 16'' 61m Press Menu From Feed Mode HDD Film Spc Cut-L Punch Burn then enter Cut line (off) - press the arrow keys to go to COND then Enter Cut-L SPC change to zero and change also the...
  2. R

    Error in LD-M1090 Blinking of dev, fix, water

    what d0 y0u mean by cpu pr0blem? Please tell me exactly. Eprom? Micr0 chip?
  3. R

    Error in LD-M1090 Blinking of dev, fix, water

    Hello, Can anyone tell me the meaning of this error. In the display pannel, The icon with one colored drop over one clear drop + dev blinking, then fixer blinking, then water blinking changing every 2 seconds. thank you very much
  4. R

    FT-R 3050 Initialising error/message

    Sir: It means the initialization process is not complete. When power up the cont board will check the mechanical parts. may be there's a blown fuse or stuck up mechanism. These happen in FT-R series...
  5. R

    problem with screen ft-r3050

    Fuse no. 3 in the Cont board, it look like ceramic colored green. Value: 0.5 Ampers Please check the ND changer before you replace the fuse. you can check it in the service menu by selecting the filter. you can change it anytime but if not changing maybe the motor stuck up. be carefull with the...
  6. R

    FTR-3050 Machine error 15

    Hi, Usually this error will lead to change the laser diode unit. but the question is how if it is not laser diode? There's a technique on how to check the laser diode using your digital tester but problem this is a secret for some of us. Hint: error appear if ASEN position left and right was...
  7. R

    Need help FT-R3050

    -First open the front door. Two philip screw -Pull up the Cont board Base and clip to the two screws -Under it, you will see the black cover, remove it #4 allen wrench (4 pieces) -Please do not touch the lens or the cover will contact the angle 45 mirror. -Clean all the lens with cotton buds...
  8. R

    FTR-3050Q imagesetter ,LD-283Q film processor service and spareparts manuals

    I have all the manuals and diagram for those machine but i can offer you a technical support. or if you have a question. just email me.
  9. R

    FT-R3050 - Serial Error

    The cont board has a programmer it self but you need a software to program it by using mac os 9. But the problem only technical people who train to do this. because sometimes the programmer will destroy. You can see in the Cont board the 3 ic's. The 2 ic's is you can program and erase but the...
  10. R

    increasing exposure value on screen FT_R3050

    increasing exposure value on screen FT_R3050 Maybe the problem is your Cont board that can't make a program. Usually, If you reached the 300 intensity and no error appear, maybe the polygon mirror have a dirt but you must check first the screen dots. Check the 50% in the test pattern (if you...
  11. R

    Katana FT-R 5055 Machine Error 15

    Machine Error 15 -Error has occured at the beginning of exposure (The line start pulse signal has not been detected) Please check the laser transport maybe there's a piece of film or a dirt. If you can make a test exposure in the service mode you can see the laser beam but be carefull with...
  12. R

    Introduce yourself!

    My name is Roy Cagang, a proprietor of Norgate Electronic Service here in the Philippines. I'm a Service Engineer with a great knowledge in trobleshooting for any pre-press, press and post-press machine. I can help/assit you for your existing machine. Most of my client sent me the schematic...
  13. R

    HQ510PM v5.3 Rip Plugin for DTR 5120

    I have DTR 5120 plugin driver but for Harlequin PC RIP. I can assist you.

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top