Recent content by viclpp

  1. V

    Flatbed Printer

    We are in the market of getting a Flatbed Printer. As of right now I am not sure what type of material would be our main material but we've been outsourcing a lot of gator boards and some other signage. I've been looking at HP Scitex FB750 and the Roland VersaUV LEJ-640FT Flatbed. Anyone...
  2. V

    Kodak Nexpress s3000 Reconditioned

    Hello everyone. We are planning to purchase this digital machine and I would like more feedback from anyone who has experience with it. It looks like a good product but I am concerned about up time on this machine. Does the up time have to do with the operator? We are just scared we are...
  3. V

    duplo system 5000

    Does anyone know what the thickness I can stitch and face trim on this machine is?
  4. V

    rotary label machine

    Thanks for your help. I contacted mark andy and they are very helpful. THANKS!
  5. V

    rotary label machine

    I don't think I am posting in the right place but since i guess labels is similar to a web I am just going to post it here. I am new to this or I am getting into this type of business but basically I am doing some labels that are about 2.125"x4" with die cuts and everything. I am going to be...
  6. V

    Digita Machine that can do 16pt?

    I guess it depends on the sheet because we have a c901 and we can only simplex a 14pt c2s so I think we would have problem running a 16pt. We've tried 130lb classic crest and it already gives us problem with simplex. Basically right now we are doing a lot of variance on our c901 from booklets...
  7. V

    cp bourg trimming issues

    even if we put a blade that is sharpened in, it is the same. We got a mechanic to try and still the same. Don't know if it did it when we first got the machine. I wasn't here. I've been here for like 2 years only now and its been like this since then....
  8. V

    cp bourg trimming issues

    Does anyone own a cp bourg sbm4 booklet maker and have problem with the face trim unit not able to face trim a certain amount of thickness. We are only running able to run 10 80lb gloss text sheet face trim with success. Anything thicker will trim and then freezes on the way down as if the...
  9. V

    Digita Machine that can do 16pt?

    Consistently? We are planning to run a good amount of it every week. about 2,000+ sheets a week.
  10. V

    Digita Machine that can do 16pt?

    Is there any digital machine that can do 16pt paper? Thanks Vic
  11. V

    Duplo DBMI VS Horizon stitchliner 5500

    Anyone have experience with both of these stitchers? I know the DBMI is fairly new but anyone have any take on it? Thanks, Vic
  12. V

    dots breaking up

    I'm looking in our 25x zoom loop and I can see the dot breaking up slightly. what should be my process to look at first? ·check plates ·changed packing ·dump water tank and refilled ·changed to a different brand ink That's what I've done already. Can over packing cause the dots to...
  13. V

    what causes gripper to tail end color difference

    We have a shinohara 79
  14. V

    what causes gripper to tail end color difference

    I have a jobs that is the same color (green) ran 4 color process. from the middle of the sheet to the tail end of the sheet it is a different color. Is this caused from ink form to oscillator roller to heavy?
  15. V

    ManRoland Service in Texas

    We were just looking at a 505 don't know if we should make the jump on it or not. A used one. I will give you a call if we plan to get one or not. Thanks.
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top