Recent content by williscahill

  1. W

    Looking for a print supplier who does padding of memo pads with a different design on each page

    Do you have a 50 page pdf ready to go? If not, preflight includes design and proof. I know this can certainly be done but it could get expensive. 50 pages aren't too hard to rip. Ideally 4 or 8 up on a 8.5x11 or 11x17 sheet respectively. How many pads do you need? Do you have any local...
  2. W

    Problem with Wohlenberg 137 cutter

    If you have a multimeter handy, can you check if you have continuity through the buttons when they are pushed? Do this several times to make sure the buttons aren't the culprit. If they are fine, the next thing to check would be the wires leading from the buttons to wherever they go. Check for...
  3. W

    Polar 76 EM problems

    I have an update. So the HK board needs 12v supply to light up led v1, and also to light up led v1 on the KK board. I found a shorted capacitor on the KK board and am going to get a capacitor to replace it to see if it fixes the issue. I notice that if I plug in the HK board without the KK...
  4. W

    Polar 76 EM problems

    Hello! I'm having paper cutter problems. To be specific, we have a Polar 76 EM that is giving us an 88 code. For the past few months, we have been working to try to fix this. We hired a certified polar tech and he couldn't fix it. We had it working intermittently. We have checked the safety...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top