Techorans cut out

Paperboy

Member
Hi everyone I run a 5 col sm52 cpc and in the mornings on start up the techno rand cuts out at random moments any ideas ?
 
Please identify why type of Technotran do you have ? if you take some PIC from ID from
the plate of Technotran for help you, in the troubleshooting

Let me know, sincerely

Blessing

[email protected]

Mobile+WhatsApp:+505 8861 1441
 
Hydrostar compact alpha d
 

Attachments

  • 0F419795-6D1B-4F6B-8EE5-68B65B87F2E8.jpeg
    0F419795-6D1B-4F6B-8EE5-68B65B87F2E8.jpeg
    1.7 MB · Views: 273
  • 195929AD-BE44-48CF-8F70-A10F695084A7.jpeg
    195929AD-BE44-48CF-8F70-A10F695084A7.jpeg
    1.2 MB · Views: 262
Hi sir:

The 1 steps: is test the Power supply Low voltage undervoltage 24V, cause can be control voltage too low 19V, Check the power supply vs the schematic diagrams from your TechnoTran HydroSTAR Compact Alpha.d.
and Repair.


2) Look for loose connection, corroded, or broken lines, or connector dirty, or faulty, clean very well and fix it.

Blessing

[email protected]
Mobile+WhatsApp:+505 8861 1441
 
Thanks for reply I will look into this Monday - this problem causes the press to freeze - also when all up and running somtimes I have to re boot because the duct roller will not spin ? Yesterday I came in and could move the tray in the feeder up or down ?
 
ok, test the steps with the Voltage sir

The 1 steps: is test the Power supply Low voltage undervoltage 24V, cause can be control voltage too low 19V, Check the power supply vs the schematic diagrams from your TechnoTran HydroSTAR Compact Alpha.d.
and Repair.

2) Look for loose connection, corroded, or broken lines, or connector dirty, or faulty, clean very well and fix it.

Blessing

[email protected]

Mobile+WhatsApp:+505 8861 1441
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top