Search results

In a Katana FT-R5055 ImageSetter image comes as like the attached picture. After replacing the MCON5 PCB this problem has solved. Please suggest this problem is due to MCAD5 PCB or MCON5 PCB?

Dear Sir, This problem is solved after replacing the SRAM Board. Thanks.

Dear Ashok Taneja, The problem is solved after replacing the Power Supply. Thanks.

Here is the log file.

In a Katana FT-R5055 Imagesetter image comes as like the attached picture. Some fonts are clear and some small fonts are broken. Please suggest.

Heidelberg Suprasetter is showing RECORDER ERROR 5010, 5525, 6315 and RECORDER INFO 6450. I attached the picture for clarification. Please advice what to do? Thanks.

Dear Sir, I am in need of EPROM Data for MCon5 PCB of Katana FT-R5055. I have the EPROM Programmer. If anybody can give me the Data I will recover the EPROM. I attached herewith the Machine Test Film for your kind information.

Dear Adnan Azzam, Thank you for your kind reply, but there is no Hard Disk with Katana FT-R 5055. The Supply is 5.22 Volt. Please advice.

Can anyone help with this problem ? My image-setter Katana FT-R 5055 comes up at start up but no other functions are starting. ND Change Motor with all other Motors are not working. After some time it is showing Machine Error 30. It means the initialization process is not complete. After...

Dear Mir Alam Hossain, I have the 64 bit PPD for Luxel. Be patient for next 2 days. I will solve your problem. Thanks.

Dear Sir, I am in need of Installation & Service Manual for SCREEN PlateRite FX1200 Flexo/Letterpress CtP. If anybody help me with the Installation & Service Manual I will be ever grateful.

This problem is due to Vacuam Pump Section. I have some questions about the Vacuum Pump. If anybody reply me I will be ever grateful. 1) When the Vacuum Pump will Turn ON and how long it will remain ON ? 2) The Solenoid Valves are controlling the air blow of the Vacuum Pump into the...

I am in a trouble with Fuji Luxel F-9000 Image Setter. The Travers is mooving fast and smoothly.Traverse Carriage movement and Green Lamp of the Traverse READHEAD is OK. But when I load the Film it comes out from the Film Cassette and stopped at the entrance of the Traverse Carriage and...

Dear LEO, Thank you for your response. I have already replaced Traverse motor. But no development. Best regards Atiqur Rahman

Dear Sir, I am in a trouble with my Fuji Luxel F-9000 Image Setter. At first the problem was with the Power Supply. I have replaced the Power supply. Now when I switched ON the Machine all the Pre-Cheque functions are working properly, Traverse Carriage movement and Green Lamp of the Traverse is...

Dear Greg Eagel, I am interested to buy Katana 5055 and ECRM63QS Imagesetter. I am willing to buy if you can give me with cheap price. Please inform me in detail about the Katana 5055 and ECRM63QS. Are you accepting L/C or not ? If you have any other Machineries please inform me in detail with...

Dear Maxon, I have also the registration Problem with ECRM Stingray 63 QS. Please advice me ( natiqur@yahoo.com )

The problem was solved after placing the DCU SIMM as follows:- D1 D2 S1 D3 S2 D4 S3 D5 D6 S4 S5 S6 S7 S8

Please Suggest me. I will be ever grateful.

Dear Sir, I am in a trouble with my Screen SG-8060P Mark II Digital Drum Scanner. At the time of scanning it is showing Error massage:- S-S72F1 : Scanner Error occurred. DCU # 1 illegal DCU is inserted. I have opened all the 14 DCU SIMM and replaced after cleaning. Now it is showing Error...