Search results

It appears to be there.

Have hopefully a simple question....We're running Prinergy 8.3 with Preps 8. We also have Prinergy EVO. Recently we had to replace our old router so we ended up with all new IP addresses etc. for our computers/servers. Prinergy EVO came up no problem but Preps couldn't find the floating license...

Re: "Unable to create the output directory" error in RIP Hi All! I had this issue last time and the tech logged in and fixed the issue but I can't remember all the steps he made. Perhaps I'm missing something. This is on the Kodak EVO rip to the Platesetter. Apparently, if my memory serves me...

Hey all! Quick question. Not sure where this belongs...but... If y'all had one of your good (decent) customers walk into your shop with 300 paint swatches that they wanted scanned and color corrected, what would you do? There are a bunch of swatches that are just not going to match in CMYK so...

So I now I look at my diskless question and think what an idiot I must sound like! Anyways....when we were using Prinergy EVO, we always did our archiving to DVDs as probably most people did and some still do. When we purchased Prinergy Connect due to the phasing out of EVO, I was told that you...

Thanks for the help guys! What about the diskless ones? Is that more of a risk?

Hi all! Quick question...A while back we switched from Prinergy EVO to the latest version of Prinergy Connect and I was told that we needed to have a Backup/Storage unit since we can't archive jobs like we used to do on EVO. I was wrongly under the assumption that a good external drive would...

Re: Changing Signature Job Number in Prinergy This is probably a simple question but I can't find where or how to do it. We constantly get reorders so I go into Workshop and copy the previous job and apply the new job number. Now, I also need to change the number in the signature to reflect the...

Thank D - Using Preps 6 on this computer although I have the newer version on our new system. Thanks for the info! Our digital press guy mentioned Cut and Stack and then I remembered there was that setting in the Bindery part of Preps. I'd never used it before and they never showed us that in...

Hi all! This may be a dumb question, but I have 2000 pages of numbered variable data pages, 8.5 x 11", in pdf format and I need to print them in numerical order 2up on a 12 x 18" sheet. Is there a way in Preps to have one side print stacked 1-1000 and the other side 1001-2000? I've already...

Would anyone happen to have a Toyo Denki VF61V Intelligent Inverter Instruction Manual? I've looked online but can't find the correct one. Any help would be greatly appreciated! Thank You! (Sorry I edited the thread line and didn't realize I left the question mark…now it won't let me delete it)

Hi All: I am currently looking for a part number for the bottom rubber rollers in the unloading section of a Kodak Magnus 400. The top unloading rollers are fine but the bottom ones are getting really soft and sticky. I have a temporary fix right now, so I'm still up and running but I need to...

I of course, was referring to those here in the Kodak forum....From my understanding, (at least in this area), are mostly RamPage users....

Since 99% of us are running either Kodak software or hardware, is anyone that concerned about the state of Kodak? We are in need of upgrading our workflow, I'm getting ZERO response from Kodak on pricing, and we're not sure if we want to invest it in Kodak if it they can't survive. Anyone else...

Thanks Hansman - interesting that you mentioned that. We just had a former Kodak Tech come in and showed me how that works. I haven't tried it yet but when I get a chance, I'll see how it goes.

Emailed Ryobi who forwarded my email to their US parts supplier who then contacted me. Good thing too considering the part no. had changed since when the press was built. Unfortunately, the part still apparently has to come from Japan which takes 9-15 days. Extremely helpful and quick to respond!

No, I didn't change anything in that regards. I did try to see if it would change anything by switching the dimensions, but for some reason it still rotates. We have a guy coming in that works on Prinergy, so maybe he can enlighten me on why it wants to rotate it. I'm running Preps 5.3.1 which...

Thanks for all the help!....Problem solved!

Unfortunately, when we bought the press, the bulb was missing. Maybe if someone has a 582H they can get the specs off the bulb for me?

Would anyone out there know of a good Ryobi Parts place? We're trying to locate a fluorescent bulb for a 582H - Ryobi Part No. FA21080PGM / 60Hz and not having a lot of luck. Thank You!