Search results

Check platesetter spec sheet regarding max current then add some 500-800 VA for the rip server. Your target will be a pure sinewave, double conversion UPS around 6 kVA. Do not, repeat, do not use standard line interactive ups units. The UPS will supply power to the ctp and rip server only. Make...

Refusing to go IPA free for a reason ?... ☺️

Zoom motor may be ok. Wrt to test patterns recheck the media type set as nega.

I didn't have any major problems setting up Eclipse on Avalon / PTR platesetters including GLV machines, they do require more energy though. Bear in mind these are negative working plates i.e. laser writes the image. You are not supposed to see any banding in non printing areas as there's no...

A media handling NVRAM parameter got a corrupt value, you need a qualified tech to look it up.

Could this be why a most prominent person running a certain business in Florida still tries to set base in Washington DC ...?

There is a friction control built in the input cassette you can adjust to a certain degree, clean those friction pads and reassemble. The film must come out pretty tight but not 'very' tight. The shaft encoder basically never fails better don't touch it, drive motors fail quite often though...

Colin, O-rings should be all same size and tight enough to fit on the OD of bearings without buckling or waving around. Press each segment by hand to make sure they sit properly on their springs, all aligned and no ball bearing is seized. I have yet to see a damaged bearing on a multisegment...

Negative. In several ways. That is, the answer is negative. You need negative plates i.e. photopolymer violet sensitive plates. Violet laser (405 nm) platesetters such as Prosetter can only expose plates having sensitivity better than 60 microJoules per sqcm (typical range is 40 to 55 µJ/cm2...

Hi gordo, most violet plate manufacturers have shrunk down their plate size range offering or even removed some plate types from their portfolios (i.e. ProV) because of low demand. Fujifilm has a strong presence in the UK (and Agfa to some extent), but I wonder why the article disregards other...

You can only disable the offset punches from printing machine setup. The registration punches cannot be disabled.

I guess Impostrip Pro does what you need, call Ultimate Technographics.

I need a copy of the HQRIP-510PC (v.6 hqn) for Screen please, we have the licenses and dongle but lost the cd. I need to replace the host computer with another and cannot reinstall... Thank you !

Celebrate diversity !

Step 1 : open your page setup manager and edit each page setup at a time by checking the checkbox to 'enable feature', then select 'use filename as jobname' from the pulldown menu. Step 2 : edit each page setup to 'Configure' the tiff generation ; in the next window called 'Tiff configuration'...

Hagar_uk advice is spot on. Look for a 4300 or 4600 unit with low mileage and ask for a test.

Aqazi, the number of available grey levels depends on the rip software your customer uses. You didn't mention what software it is. All modern 'super cell' screening solutions based on Adobe library or harlequin or else do minute changes to dot shape as gordo described already, we perceive this...

As far as I know there is no technology remotely comparable to imagesetter film exposure to achieve ± 4 mil spec using sheet or roll fed substrates. Some of my customers had no option but move to DTS machines.

Check emulsion side. Check roll year of manufacture or 'best before' stamp on label, the film may be old. Replace with a different batch.

How much lighter is the image ? Make sure the film is red sensitive and check the roll emulsion side.