Search results

Hi gregbatch, we need roll to roll machine thanks

Hi everybody, We are looking to buy an inkjet digital label printing machine, we are new in label printing so we need your advice for making good choice. We need machine that can print on untreated substrate (normal material used on every machine). Also we think that white color is essential...

From our experience, we believe that toner based technology is not suitable for roll to roll printing. for exemple in accuriolabel, tech recommended to always print on maximum width to avoid transfer, fuser and drum scratching. Also KM fuser tends to overheat which poses problem on synthetic...

Thank you jwheeler for your help. Do PLS-475i can print on uncoated media ?

Hi, We are looking to by digital label printing machine roll to roll. We don't know which one to chooses. We had 4 digital printing machine sheetfed on our warehouse and want to enter label industry fro small quantity printing. - Machine must can print on any kind of paper (not inkjet treated)...

Hi, We have konica C1085 that have color registration issue. We change new complete transfer unit, 4 new drum, 4 new developper, 4 new corona. When we make color registration auto adjust we have error 2 message with mean transfer unit default or sensor default. We also change all sensor and...

Thank you for advice, your opinion make sense. i will wait until the next DRUPA so i can compare technology. Also will ask KM and Ricoh to to visit some of there installed machine on production to can talk with owner and have idea.

Ynot_uk you are probably right, our actual toner based press is suffisent for a time (specially with order down due to COVID-19). But as i read everywhere, inkjet is the future for digital print with less downtime and less cost par page. So we think to test inkjet technology before buy expensive...

i know that inkjet press is more expensive than ricoh 9200, for exemple konica KM1 is about 1mi$ i think which is over our financial capacity. So i ask if there is other brand that had inkjet press less expensive i think about 150-200K$ ?

Right pippip, I'm looking for inkjet production press like konica KM1 but if smaller size if available. Riso had not high quality printing so isn't option for us. So my question is for inkjet production press, which can we choose for entry level not too expensive and not too big? Thanks

Hi Ynot_UK, By limited budget i mean that we looking for something near ricoh 9200 or little more expansive but inkjet no laser based machine. Actually we print on for digital toner based press width 330mm, we have 2 konica c1085, one ricoh 7200 and one ricoh 8310. So we plan to remplace the...

Hi, We have installed four laser printing press and we are looking to invest in an entry level inkjet printing machine. can you recommend us a model knowing that the budget is limited. Thansk,

Hi Shand, yes it come with glass scanner

Hi, We have Ricoh 7200SL installed and we need to know how to calibrate it? Please note that no fiery installed on machine so we don't know how to calibrate it. Thanks,

So no-one run or know the new konica c12000?

We have offer from canon V10000 that is equivalent to ricoh 9200. But we heard that inside there is two fuser unit!!!! that can make major issue because we use mainly heavy weight.

Therefore, as we print mainly heavy weight stock (350G). Our machine and spare part can not last there expected lifetime.

Actually, We print About 12000K to 20000K sheet per day. So we are over C1085 range and below Ricoh 9200 duty cycle. No way to buy Xerox machine because of very bad reseller that sell toner very expensive, no technical support. The only good technical service Available here is Ricoh or Konica...

By comparing Ricoh and Konica spare part price, we find that Ricoh spare part drum, belt... are much cheaper than Konica spare part price. But Konica toner Price is cheaper than Ricoh. Finally, the two brand had nearly the same cost per copy but differently distributed.

Thank you AP90 for your answer, We use in 90% of our work heavy weight paper. The problem on our C1085 is when fuser belt broke on 200k, the technical staff require to change all fuser parts, belt, the three roll, bearing... This cost too much for us when changing only belt will be much more...