Search results

If that is the case then yes I would agree with you. When I read the OP post I took the description of "thick" as the size of the brochure. I.E. 64 pages is a thick brochure. I didnt attribute it to the paper thickness. So you could very well be correct on that. I generally dont have many...

I don't think you guys have looked at the finishing capabilities of the 180 and 280 recently. If you get the production booklet maker you can do up to 120 page booklets at 20lb. Ive done 96 page 80lb cover with 80lb text before. Lied to the machine about gsm as I believe it maxes out at 80 pages...

Ok ill preface this with I have exactly 0 experience with wide format printing other than ordering some prints from a local shop when our customers need something like that. I am thinking of getting a wide format printer to be able to do photographic quality pictures and posters for a...

Well considering @Ynot_UK has been a respected member of this community for years and your this new Joe Blow who is spouting off garbage about an obsolete machine, the forum has their back. Btw, you’re probably going to have to pay someone to remove that machine. It’s about as useful now as the...

I saw that system add on. Looked amazing. If we did more spiral binding I’d consider it. We have 1 huge job a year and outsource it. It cost me less to buy the Rhin-O-tuff for this job at $500 than it would to outsource it. It was a deal I couldn’t pass up. The thing is a beast too.

I mainly just started this to brag that I recently picked up a Rhin-O-Tuff HD7700 Punch machine for coil binding. We had a large coil job coming up and with outsourcing I didnt think we would get it done in time. Hopped on trusty FB Marketplace and about 3 hours from me a guy had the punch for...

Is it the cover sheet that’s different? If so you can actually change the cover trim width in the nvm settings. Could be it’s slightly off. If that’s what you think it might be I can give you the nvm number for our 3100 tomorrow and you can see if it’s the same for your 280.

Just curious what this would mean for Xerox and the USA dealers. Essentially start will be offering the same products as the X dealers wont they?

we have a digibinder as well. I’m wondering if an air hose has maybe became disconnected? I believe the machine is driven by air and the nipper is as well. So maybe the hose is disconnected and that’s why it is not engaging? Just the first thought that came to mind since everything else is running.

Curious how this is going to change things up and how good it will actually be. It should be interesting for sure. https://www.cnet.com/tech/computing/i-just-tried-photoshops-new-ai-tool-it-makes-photos-creative-funny-or-unreal/

Price?

Here is what I went with. I chose it because our blades are only 24" total and it would hold it thickness and allow the arm to swing to each end. I watched a youtube video on a guy using a similar system to sharpen a guillotine blade so I figured for $50 I could see if its something that we...

I definitely agree with you about the blade not being where it should be. I have some blades on hand that we are using for cutting while I figure out the sharpening. I also sent a few blades back to our old shop to see how they come back without saying anything to them. It could have been a...

I actually purchased a blade sharpening system over the weekend and went to town on one of our blades. I was able to put a sharper edge on it than the current company did but its still not quite where I want it to be. but I believe with some more practice and elbow grease I can get a fully sharp...

Ok fellas I am in search of someplace, preferably in southern Indiana but understand ill most likely have to ship, to sharpen my cutter blades. We have been using a local company for the last few years that has always done a pretty good job. I wont say stellar but they've always gotten the job...

The calls are sooooo annoying. When they call I just ask them what the due date is. When they tell me the date I ask them if it’s that date yet. They say no so I tell them that’s their answer lol

Ok guys and gals, we have an old challenge 305 that we do not use anymore. It has a microcut jr installed on it. Came with it when we purchased it. We do have a Challenge 20 cutter that we use often and wanted to put the microcut on it. I contacted microcut and they said it was compatible and to...

I think thats more or less 1 party that does it like that, and CA is heavy on that party. Without getting political, we've only had a handful of candidates' campaigns ask about the union bug. All of those have been blue. Ive also been able to convince some of them when I say we are woman and...

We use the Fiery imposition as it came with our Versant. Its pretty costly if you have to purchase it outright I believe and does not have the flexibility as the other standalone softwares. That said, we do this type of job fairly often. I will gang up the job 4 up and then set the page size...

We shrink wrap some stuff. But we ship everything in boxes anymore. Our boxes run about $.85/box for 8.75x11.25x10 double walled. So even for our palletized jobs we’re looking at $15-30 which isn’t even noticed if the job is that large.