Search results

Try Print Finishing Solutions or Saddle Point Systems

No toner bottles are different.

We run some of the dustiest paper and never had this problem on our Iridesse's.

For you cutter try Print & Finishing Solutions in Placentia CA. Print & Finishing Solutions - Commercial Printing and Finishing Equipment | Print & Finishing Solutions

Both our Iridesse are color consistent and we run a lot of solids. When ever parts are due we change them never wait on the tech they will always say it can run pass what the part meter saids we never listen told them if the meters didn't matter why have them. Log in under TKO and you can see...

We have no issues with solid blacks on coated or uncoated stock when printing on any of our Iridesse's.... Agree with previous post sounds like operator not knowing how to run the machine properly.

We offer Gold & Silver metallic printing Xerox Iridesse....Where are you located?

Make sure your rates are locked for the term of the lease. Color Profiler Suite is most likely only a one year free subscription and that you would have to pay for major updates after first year.

Clear works best on lighter colors. When we run Clear as a spot we use tints 80%, 60%, or 40% of clear ink. Solid shine flood page with clear. Silver we set ink limit between 65% - 75%. The higher the density the more metallic effect it also increases the grayness of the metallic and type of...

Same here run Excel spreadsheets for all printers each month and match the spreadsheet counts to our monthly bill.

It's the envelope stock that causes the wrinkle on the edge. We have found that the cheaper envelopes gave us the most problems its the seam where they are glued. The more expensive one's run with no issues

Yes per machine. The duty cycle is 2.25M the number you're referring to is for the optimal monthly volume.It all comes down to how well you're operator's are trained to do the maintenance and fix minor issues. We can access Xerox diagnostic and fix most of the problems so very little down time...

We have three Iridesse presses and run over a million a month on all. Make sure your operators are train to do the maintenance. We do all of the maintenance including changing the developer, all belts and rollers in the machine. We go months without seeing our tech have a system in place so the...

We use the Fujipla works great for covers. I just wish the lamination rolls where bigger.

We print them on our Xerox Iridesse

We have had our Iridesse's for over two years and have not had any issues with drums or parts.

We had the same issue with the ColorPress 1000i....This past year we have been running Iridesse and the colors are consistent from sheet to sheet and we run a lot of full sheet solids. We calibrate and clean our Machines every Monday morning it's a shop rule. Did the same when we had KM boxes in...

We run FreeFlow MakeReady on three Nuveras. Support and Maintenance you're paying for updates and for a tech to come out if you have problems with the software. We canceled our maintenance years ago so we pay nothing all the updates were minor plus every year Xerox has in the contracts that...

Paper Vendors has no paper, but keep sending out price increase letters WTF.

Iridesse toner shortage in SoCal also...Ordered 3 weeks ago and still waiting. If we are unable to complete orders because of no toner we already told our rep that Xerox is going to cover our cost or remove the machines he had a panic attack cause of the volume we run on 2 Iridesse's.