Search results

Always give the Versión CPU, that you have+ serial number+ part number of Board. Blessing

Yes you can exchange the SAP, is the same for: E +ES+ED,Not problem Blessing [email protected] Mobile+WhatsApp:+505 88611441

Ok Try it to exchange, the SAP Board. Blessing [email protected] Mobile+WhatsApp:+505 88611441

Do youo have operation manual? However false clamps is Plate going in the Clamp, is inserted, and touch Switch or Sensor, by that reason V5, is going to give you false signal, maybe the limit switch is faulty or sensor, or false clamp is NOT touching very well, the sensor'swtich, look...

Some of them Is faulty, look for open, loose wires, dirty or faulty. Blessing

Hi: Did You x continuity the Switch? AND working good?. Normally, if they are in Normal position, the respective Led, must be yo change from Off to No or Vice - Versa. 2) V5 led must be OFF, however must test in SAP , all Leds

Hi sir: 1)Please test, the contact S 10 for forward ON, in the electronic board SAP If the LED v19 Yellow normally is OFF, when you push the S 10 for forward, will be pass the LED to ON. If NOT doing, test the contact S10, for loose wires, dirty, or faulty. 2) iF not doing, test too the limit...

see his email Let me know. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi : Attached is there another method , used for some factory. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi attached is there 2 ways to handle the paper cutter However using a Forklift, with woord, some other Companies using, Not problem Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: Normally you must have 3 things: 1) Reset the board with the small button in the mainboard or CPU board. 2) Review the power supply in the 1)+9V 2)+5 Vdc 3) +24 4)+42 5) -12card EO\I 6)-30cARD ei 3) Test the baterry is low, and replace only you have 10 minutes, otherwise you must loose...

Hi try to measure the input of the machine Probably the Voltage is NOT o.k, maybe you need install stabilizer in the input of machine, otherwise your will have the same problem. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Grear sir! Blessing [email protected] Mobile+WhatsApp:+505 8861 1441 Managua, Nicaragua

Grear sir! Blessing [email protected] Mobile+WhatsApp:+505 8861 1441 Managua, Nicaragua

Hi sir I have some service manual for this kind of machine Blessing [email protected] Mobile+WhatsApp:+505 8861 1441

Let me know, the ID plate for technotran, i have all for Technotran tech documentation Merry Christmas. [email protected] Mobile+WhatsApp:+505 8861 1441

Hi sir: Herre is power filter line: Number: 20A DOMESTIC 115V - EC-19869 (RP220-20-4.7) or 15A INTERNATIONAL - EC-18896 (DSC1000-4-10-4.7 Merry Christmas [email protected] Mobile+WhatsApp:+505 8861 1441

Thank you sir Blessing [email protected] Mobile+WhatsApp:+505 8861 1441 Managua, Nicaragua

Hi sir: please check the paralell between upper/low feed Rollers. 2) Overall pressure between upper/low feed Roller 3)impression drive lever/detent pawl clearance 4) Cam band 5) Ductor ink roller pressure 6)Form/Roller/Plate cylinder pressure 7) Plate/Blanket cylinders...

Hi sir: I can provide you, what do you need Let me know his email. Blessing [email protected] Mobile+WhatsApp:+505 8861 1441