Search results

There was a time that would work for a black and white machine but not anymore.

It's a transfer issue. Have you tried to adjust image transfer for black? Also you can adjust max image density for black. Also there is a different image transfer roller for black M2056684 it's a different number than for cmy. Originally they were all the same but they made a new on just for...

A customer and I figured out one time what it would cost if you were to only get parts for the standard maintenance and the toner and it came out to about what the cost per copy on the contract is. We could have been way off so don't be basing any decisions on this! You may be able to do it...

Just asking because if it is you may need to enable it in configure. Configure APPE

Is the KM1 driven by a Fiery?

What model machine? Some of them have anti condensation heaters that can be connected. Some also have settings that can be changed that will make the machine basically clean the drum when you exceed a set humidity level.

What do you get if you print each color separately on that file? You can pick which colors you want to print on the image tab of job properties. I would expect to see the defect on all colors. If it's not on just one color you could try adjusting fusing speed or transfer speed.

There are no chips in the toners and the drum is just a drum not a unit so there are no chips in those either. There are no different parts in the Heidelberg one. The Heidelberg one is exactly the same as the Ricoh one.

If you are using the paper catalog you can change the erase area in the advanced settings. You can set it to -3 mm. https://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001083/0001083291/view/adjustment/int/0154.htm If you are using the manual paper settings it can be change in service mode. The...

Here is a article describing what to adjust for toner scattering on the trailing edge. They also say it could be from the guide on the bottom of the transfer belt being dirty.

I think it looks like a transfer issue but to see if it's the fuser you could do a panic stop before it goes through the fuser.

What brand are they? I see people run them from docucopy without a problem. Did you try and adjust trailing edge transfer?

J008 is paper not feeding from the bypass (the conveyer) could be the feed rollers, maybe the side guide position, how the envelopes are fanned out.

How many prints do you have on the machine? That fuser smoothing roller does need to get replaced. You can also set the machine to run it automatically for a short time every so many pages to keep the lines from getting bad enough that the smoothing roller won't get rid of them.

Good catch! Sorry I missed it but I see what you mean now. Do you know has anyone tried to turn off main scan registration / cross track / cross feed (whatever you want to call it) I could see it do that when it shifts the paper.

Which rollers? In the paper tray?

Have you tried to lower the fusing pressure?

Gotta picture?

When I have seen that done it causes errors due to arcing. I have seen some "metallic" stuff run but I wasn't conductive either because it wasn't really a metal foil or it was coated.

If you want a contact it's going to be up to the local office if they want to take it on or not. You can alway do time and materials too. Nothing wrong with the 7110 there are still many of those in the field.