Search results

so 2 versions of command workstation are loaded one allows you to convert to greyscale and registers a black click. One version will register a color click on the same printer. What happens when the black click version now in the printed tab is reprinted from the one that doesn't change to black?

also a 7210 user had similar issues - if its a custom defined paper try using the manual entry. I had some paper settings get corrupt and the tech couldn't explain why. With the screen showing the same catalog settings as a manually defined stock I went from crappy prints to perfect prints.

30,000 is very low for a ricoh 7210. If you don't have that in a month how do you justify the 2nd lease payment? Your lease payment will go up for a 0 minimum contract. What is your average monthly click count?

Job in print buffer error. do any workstations print directly to it? Disconnect the network cables and the fiery and see if it restarts cleanly to a waiting spot.

If you make the label sheet (roll) and have one of you customers print on your stock why is that so different from printing on an epson printer. Especially when its an inferior product?

same here I stock 1 box 11x17 hammermill just for calibration

Anyone want to share their in-person opinion?

"a showstopper" as I understand it is a positive. I just don't know if inkjet would dry on a foil, even if it dried to handle seems like it would scratch easily.

Does anyone know if this will be a live machine or is the "sneak peak" just a concept video? Which we can all see free in a month. I wasn't going but I may now to see this machine.

Since no device can hold a 1% dot isn't acrobat displaying what you get when you print it?

Bad Grey! Bad (Dog)Pressman! - spray with water Well we can't smack them with rolled up newspaper anymore. nobody has them.

It also depends if the tab prints 2 sided or 1 sided

Check the overlay settings in all the programs! What you posted looks correct in acrobat and not in the other two or are you saying you want the box there?

A single $4 print off a 4 million dollar press? they will not be around long

I assume you have done a total shut down and reboot for the machine and feiry? I would even unplug them both for a good few minutes.

Try feeding the paper from the drawers below the fuser. There is a discussion on here about not being to run multi part forms from hi-capacity pod drawers because they don't collate correctly when trying to do exactly what you are talking about. I also find some combinations of settings disallow...

How do the sleek machines that put down the soft touch printable laminate do with foil over that. does it change the feel of the paper to much?

doing it by eye = building in a little fudge factor is the term we use. If you don't trust your side guide to be square to the blade you need a new cutter.

turn your pile counter clock wise to put the cut edge against the side wall. this keeps it square and will show 1 cut mark for all but the last cut, and you should know the final size. Or draw the line connecting the cut marks on your top sheet and set the program cutter for the other lifts.

What feeder configuration does your 7210 have?